Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Yeah I primmed it the glo plug is good,it was running good before this and all the sudden quit it turns over good just not getting fuel and startingHave you tried priming by plugging the exhaust while you are cranking the engine..... check you glow igniter for charge and maybe even take out the plug and check it on the igniter to see if it glows brightly....
You can also blow into the pressure line and see if fuel moves toward the carburetor, it is a process of elimination sometimes to diagnose no start problems.....
I cleaned the carburetor. not long ago and reset the needles back to factory settings.I thought about swapping out the motor and work on the motor that won't start off the truck and possibly put back on lateryes and carb may be clogged also, may need a quick disassembly , if you have an air can or or some thing to blow it out and clean it. I just had a clogged carb, wouldn't prime but if I poured fuel in the carb it ran.
Was it difficult to rebuild it,what all did you replace,did you put in new case bearings.I looked at the cost of parts and the cost to rebuild looked like more than the cost of a new motor.there you go, I just rebuilt my sons f4.6 motor this morning, ready for break in.
Welcome to HPISavageForum, a friendly forum to discuss the Savage RC Truck.
Your voice is missing! You will need to register to get access to the following site features:We hope to see you as a part of our community soon!