My Rear Wing

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
K

kosss

Member
Messages
37
Location
Grafton Australia
Hi
Just thought i would show you my newly fitted rear wing
new rims ,throtal mod and sway bar
Thanks
P7090199.jpg

P7090204.jpg

P7090205.jpg

P7090206.jpg

P7090207.jpg

P7090203.jpg
 
Thanks Jester
Yes made it and fitted it in the shed last night
This is my RTR x4.6 over the week end i will be adding the stainless steel breaks. hardened 17tooth clutch bell and a 47 tooth steel spur gear also my mate is going to paint a desert rat (pro line) shell for me
will post photos when completed
i just brought 8 cen gen shocks for $60.00 off eBay in the US. The prices are so cheep on most items in the US that's where i get most of my items from freight to Australia is usually cheep
 
Looks really nice. I wonder how the wing mounting plate will hold up though. How thick is it?
 
Sweet truck man!!!

Like the throttle mod and everything else you have done!!!
 
Last edited by a moderator:
thanks for all the comments I made the sway bay from this link http://www.rcbasher.com/savsway.html
i am taking it out this weekend for a go .So Sunday night i will be posting either in this thread or the crash thread after i take it out only time will tell
i had a set of Cheyenne Narrow Bead-Loc 40 Series 23mm HD
rims but didnt like them .Will fit the rims to my 40 series big Joe tyres ,to see what they look like .don't want to use the big Joe tyres as i read somewhere on this forum it puts strain on the drive train and can cause breakage
 
Well the wing held up OK but ran it a new problem. The shock bolt has hit the fuel tank and slightly dented it. So i had to make a guard so it wont punch a hole in the tank next time i also got out my mini vinyl cutter and went to town (i know the stickers are not straight )
do you guys think the guard will work or is there another solution

P7130210.jpg

P7130211.jpg

P7130213.jpg

P7130214.jpg

P7130215.jpg

P7130216.jpg

P7130219.jpg
 
another thing you can to to protect your tank is put a pan head screw in for the shocks, going the other way you have them routed now, with the bolt head by the tank, and the nut on the rear of the tower.
 
Sweet looking truck Koss. I noticed you were talking about putting stainless steel brakes on it. Don't do it, I'm sure you won't like them. Stick with the red fiber ones. If you just want to buy some sway bars, blue groove makes a good kit.

Blue Groove
 
Hi
got my cen shocks today any tips on fitting them to my savage x ??
also took video footage of some of saturdays run will post when i convert it

P7210220.jpg

P7210221.jpg

P7210222.jpg
 
Hi
got the shocks mounted today and the shell as well. I am going to cut a hole in the windscreen on the shell for cooling. Do i need to cut a hole above the engine as well ,every thing fits ok
will test drive tomorrow ,will post video if any of you guys are interested.

P7260262.jpg

P7260263.jpg

P7260264.jpg

P7260265.jpg

P7260266.jpg

P7260267.jpg

P7260268.jpg

P7260269.jpg

P7260271.jpg

P7260270.jpg
 
Personaly, I like to have a hole above the engine. Not only for cooling the engine but it makes it possible to start the truck with the body on and you can temp the engine with the body on. After you have to take the body off 50 times to start it you will see what I mean.
 
thanks for the info. i see what your saying and will cut the hole out before the weekends run
my mate droped in another shell he painted up for me
what do you guys think

P8070272.jpg


P8070273.jpg


P8070274.jpg


P8070275.jpg


P8070276.jpg
 
You must log in or register to reply here.

Latest posts

Members online

Total: 957 (members: 1, guests: 956)
Back
Top