xll-SavageX-llx
★ CaNaDa Eh ★
- Messages
- 1,480
- Location
- Hamilton Ontario
What's up guys, as the title says the esc is not arming. After a month or so I put the flux back together (new dog bones, diffs and HD drive gear) I wanted to run it for a bit. Charged up the packs plugged every thing in TX on then ESC and no beep beep beep beep or lights nothing. First thing I thought was I plugged the ESC wire into the wrong channel or in backwards I checked and it was all good. The ESC is getting no power at all the receiver light isn't coming on... The packs are good I keep getting the spark when I plug them in and I poop a little jk
Not sure if I made the right choice but I did open the esc up cleaned it out made sure every thing was good, only thing I can't tell is if the solder joints failed some where.... So before I contact CC I'll pick your guys brains for a bit
Later
- Brandon
Not sure if I made the right choice but I did open the esc up cleaned it out made sure every thing was good, only thing I can't tell is if the solder joints failed some where.... So before I contact CC I'll pick your guys brains for a bit
Later
- Brandon