Pope
Well-Known Member
- Messages
- 3,442
- Location
- Columbus Ohio
Anyone have some links for the required hardware for a wing?
-
Ask questions. Share your HPI Savage knowledge. Register TODAY!
Looking for wing mounts and such.
- Thread starter Pope
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
ryugaiden05
Well-Known Member
- Messages
- 424
- Location
- Ahoskie,NC
Wing Mount
http://www.platinumrcproducts.com/prc 184.html
Mounting Kit
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXMYF3&P=7
Then pick any wing you want that can fit the mount.
http://www.platinumrcproducts.com/prc 184.html
Mounting Kit
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXMYF3&P=7
Then pick any wing you want that can fit the mount.
ohmygahitscoby
Rollin' like a Big Shot
- Messages
- 381
- Location
- San Jose, CA
You can buy the wing mount from Larsen (PRC) also, so it's all in one transaction.
Pope
Well-Known Member
- Messages
- 3,442
- Location
- Columbus Ohio
- Thread starter
- #5
thanks guys how does that hellfire mount hold up looks really cheep.
ohmygahitscoby
Rollin' like a Big Shot
- Messages
- 381
- Location
- San Jose, CA
Never tried it. I think you can mount a Mugen mount on that plate. Much more durable (Has cross bars). If not, DPP Racing sells a plate too made for the Mugen wing mount.
Pope
Well-Known Member
- Messages
- 3,442
- Location
- Columbus Ohio
- Thread starter
- #8
do you have a link?
- Messages
- 3,849
- Location
- Worthington, MN
I have never tried the Mugen Stay but Have heard it will mount to my plate. My place was originally designed to fit the Hot Bodys C8152 which I sell as well at a great price. It is taller and stronger than the Hellfire mount linked above. However the Mugen stay is taller yet. I do not stock any wings as there are so many different kinds and colors and everyone has there own liking.
See=====> for more info: https://www.hpisavageforum.com/forums/showthread.php?t=9745
See=====> for more info: https://www.hpisavageforum.com/forums/showthread.php?t=9745
Last edited by a moderator:
Pope
Well-Known Member
- Messages
- 3,442
- Location
- Columbus Ohio
- Thread starter
- #10
Going with Jason's stuff when he pm's me with the info. Should have a wing in a week or so. Bash on.
Core
Active Member
- Messages
- 117
- Location
- New Jersey
just an fyi pope, the wing mounting holes on the wing stay are what i guess would be "standard". as a temporary wing i used a traxxas one which was predrilled and fit spot on.
Pope
Well-Known Member
- Messages
- 3,442
- Location
- Columbus Ohio
- Thread starter
- #12
Okay here is what i did
Wing mount for Jason http://www.platinumrcproducts.com/prc 184.html
Wing holder http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXJBH1
Hardware http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXJBH2
Wing http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXSBS1
And one of these since i am starting a mid-tank mod in a week or two.
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXVK03
Thanks to everyone for your input and help I will post pictures when it is done
Wing mount for Jason http://www.platinumrcproducts.com/prc 184.html
Wing holder http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXJBH1
Hardware http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXJBH2
Wing http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXSBS1
And one of these since i am starting a mid-tank mod in a week or two.
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXVK03
Thanks to everyone for your input and help I will post pictures when it is done
