NizzleMaShizzle
Member
- Messages
- 35
- Location
- Beaumont
Did some mods to the rig and she is running noice, and her rear end is plumper than Nicki Minaj :wink:
-FLUX diffs
-HD Drive Cups
-HD Dog Bones
-HD Widened Axles/Spacers
-Hotracing 17mm Hubs
-HTL mod, using an 8-32 pressure fitting
-Battery Level indicator
-Trencher X's
-Engine teaser :twisted:
Here's a vid of my mods:
HD Drive Cups/Dogs/Axles/Spacers:
Hotracing Hubs +5mm wider 17mm hex:
I like how these hubs have a tray with grooves to capture the rear of the Warlock rim (only works for these rims) adding more support for higher power applications:
And if you don't have Warlock wheels just flip the tray over for the standard 17mm hex:
Battery level indicator:
HTL mod/ drilled a hole in my tank using a 1/8 drill bit to reroute the fuel pickup, capped off the original fuel pickup with an antenna cap, used a dubro 8-32 pressure fitting with some silicone sealant, and used a dubro in line filter since it bypasses the filter in the tank. So far I love this mod! Rig runs so much smoother now. No need for a mid tank IMO:
Trencher X's. Look how fat and wide she is. I love it!
A Savage version of Nicki Minaj:
"Oh but those trenchers are soo heavy you're sacrificing performance yada yada..." Don't worry I'm still waiting for stuff in the mail to address that issue here's a teaser:
-FLUX diffs
-HD Drive Cups
-HD Dog Bones
-HD Widened Axles/Spacers
-Hotracing 17mm Hubs
-HTL mod, using an 8-32 pressure fitting
-Battery Level indicator
-Trencher X's
-Engine teaser :twisted:
Here's a vid of my mods:
Hotracing Hubs +5mm wider 17mm hex:
I like how these hubs have a tray with grooves to capture the rear of the Warlock rim (only works for these rims) adding more support for higher power applications:
And if you don't have Warlock wheels just flip the tray over for the standard 17mm hex:
Battery level indicator:
HTL mod/ drilled a hole in my tank using a 1/8 drill bit to reroute the fuel pickup, capped off the original fuel pickup with an antenna cap, used a dubro 8-32 pressure fitting with some silicone sealant, and used a dubro in line filter since it bypasses the filter in the tank. So far I love this mod! Rig runs so much smoother now. No need for a mid tank IMO:
Trencher X's. Look how fat and wide she is. I love it!
A Savage version of Nicki Minaj:
"Oh but those trenchers are soo heavy you're sacrificing performance yada yada..." Don't worry I'm still waiting for stuff in the mail to address that issue here's a teaser:
Last edited: