Help me build complete front and rear ends

[Rep99099]

I am building an FLM truck from scratch and need to to completely build front and rear ends from the ground up, diffs, arms, bulks, everything!

This is all I have on my 'need to buy' list right now:
http://cgi.ebay.com/HPI-100415-SUPE...Accessories&hash=item3f01754271#ht_1499wt_911

And for lower arm braces should I get the standard HPI purple braces or some FLM braces?

I want to build this truck as light as possible.
It will be run in the sand dunes.

Anyone help me out with the rest of the stuff to get?

 

[xll-SavageX-llx]

My FLM mid-tank with 250cc of fuel and tires weigh just over 12lbs

 

[Combuster]

for lower arm braces you can get the hpi graphite ones
http://cgi.ebay.com/HPI-73070-GRAPHITE-A-ARM-BRACE-SET-SAVAGE-21-25-4-6-X-/270565803511?cmd=ViewItem&pt=Radio_Control_Parts_Accessories&hash=item3efefa85f7

 

[Combuster]

also you should get the complete differential from a flux with the bp ring and pinion already installed, stock a-arms, skid plates and the purple plates that goes on top of the skid plate, shock towers, shocks, servo saver from x.

 

[Rep99099]

This? http://cgi.ebay.com/NEW-BULLETPROOF...Accessories&hash=item1e5cfa8e30#ht_707wt_1137

 

[kvnnets]

This? http://cgi.ebay.com/NEW-BULLETPROOF...Accessories&hash=item1e5cfa8e30#ht_707wt_1137

Yep that's the one.

 

[Rep99099]

???
http://www.hpiracing.com/products/en/86249/

 

[Combuster]

???
http://www.hpiracing.com/products/en/86249/

it depends if you want your truck standard width or savage xl width if you want xl get the ones with the purple spacer and if you do you don't need the thing you linked above only the dogbone.