pete3091
Active Member
- Messages
- 108
- Location
- ne. philly
hi guys what is the best motor for this Brushless conversion
-
Ask questions. Share your HPI Savage knowledge. Register TODAY!
going to take my flm nitro in a Brushless conversion
- Thread starter pete3091
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
links, including eBay, Amazon, and others.
xll-SavageX-llx
★ CaNaDa Eh ★
- Messages
- 1,480
- Location
- Hamilton Ontario
Castle Creations 2200kv.
You can pick the combo motor and esc up for 250 shipped on ebay. Or the HPI Tork 2200kv and esc which is pretty much the same as the castle one since castle creations made the motor and esc for HPI!
I'm running the castle creations 2200 in my flux and it's awesome. I would imagine the Tork is the same.
One thing to remember with the castle 2200 is that it's 1.45mm bigger in diameter so the stock hpi mounts will have to be bored out.
You can pick the combo motor and esc up for 250 shipped on ebay. Or the HPI Tork 2200kv and esc which is pretty much the same as the castle one since castle creations made the motor and esc for HPI!
I'm running the castle creations 2200 in my flux and it's awesome. I would imagine the Tork is the same.
One thing to remember with the castle 2200 is that it's 1.45mm bigger in diameter so the stock hpi mounts will have to be bored out.
xll-SavageX-llx
★ CaNaDa Eh ★
- Messages
- 1,480
- Location
- Hamilton Ontario
Sorry my bad the difference is 1.49mm
pete3091
Active Member
- Messages
- 108
- Location
- ne. philly
- Thread starter
- #4
thanks buddy. i was lookin into that u and the tekin rx8
