front suspension

[z24thugg]

when i push on thefront of my truck the wheels want go out like \ /instead of l lis there a way ti fix it

 

[rodshemi]

thats just the way ifs works thats why rock crawlers and 1:1 4x4s are best with solid front axles.

 

[Larsenracing]

They shouldn't do it much but will some. Do you have any aftermarket parts in the suspension as far as different length arms or RPM arms, C-hubs, anything.

 

[z24thugg]

i put new c hubs and a few other things on but didnt change the arms...i put the integy turnbuckles on but they don't fight fight like they need shims

 

[Crash]

I tested mine today.

Mine does not change the angle at all when I push done on the frontend.

I also have a set a Integy turn buckles

 

[groovethumper]

You need to adjust your turnbuckles, also did you change shock positions. All this figures in to the equation. Peace.

 

[Larsenracing]

The change of shock position will not play a role in the way the tires lean unless they already do. The main think that plays a role in this is the distance between the arm pivots on either end and there location. The length of the arm also has something to do with this. You must have changed something that affected this.

 

[groovethumper]

The change of shock position will not play a role in the way the tires lean unless they already do. The main think that plays a role in this is the distance between the arm pivots on either end and there location. The length of the arm also has something to do with this. You must have changed something that affected this.

Are you sure about the shock position. I think it would change the angle, even if it is minimal. I still think he needs to adjust the turnbuckles. Peace.