flm extended chassis..need help with throttle linkage

[800screws]

i just got done swapping everything over to the flm lg extended chassis...now i having problems with the stock throttle/brake linkage working right....
anyone have some pics of their setup with the servo in the stock location? and a parts list on what they used? thanks

 

[xll-SavageX-llx]

I found out with the stock th/br mixer it was to big for the spot on the flm chassis. I took my file to it and made it fit.

Here is my linkage set up :

In this picture the spring should be on the top linkage not the bottom like this :

From the other side:

I don't know what i was trying to take a picture of but this might help too :

and for the parts list there are 100's of threads about this mod. This should get you started.

https://www.hpisavageforum.com/forums/showthread.php?t=6977

 

[800screws]

only thing is my servo is in the stock location....

 

[xll-SavageX-llx]

only thing is my servo is in the stock location....

Oh yeah
I totally forgot about the stock location. Hmmmmmm...
I thought the stock location for the th/br servo was in the rear but where would the tank go haha my bad.

 

[Slimshamis]

I did this I put little spacers in between and offset the linkage here is my setup

 

[Mickey]

the stock linkage should work for the servo in the right location. do you have any pics of whats wrong with your set up?

 

[Slimshamis]

Oh sorry I'm with Xll forgot the about stock location lol

 

[xll-SavageX-llx]

Oh sorry I'm with Xll forgot the about stock location lol

glad I'm not the only one. It's been so long since i had the stock set up..