Diff part question.

[cOLD]

I looked around the forums and the SS manual, but couldn't find a solution...
I took apart my rear diff because it didn't seem to be driving either rear wheel. When I got it out, one of the outdrives basicaly pulled out free. After opening up the diff, I found that the pinion gear ws in pieces and the pin had been reduced to particles. I removed the other pinion gear and that pin was in 3 pieces, so that the outdrive was spinning free inside the pinion.
So my question is, what is the part number or size of the pin that goes through the outdrives?

 

[M0rphin3]

same size as the stock wheel hex's use, if you bought a kit it should of came with extra pins, actually I'm pretty sure everything on the truck uses the same "pin" size

 

[cOLD]

sweet, I do have some extra wheel pins.
thanks!