Custom air filter protector tab

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
reviving this old thread but i didn't like the tab hitting the filter either, so i just hung the airfilter with some wire. it's also extra reassurance to prevent it from flopping about while driving
 

Attachments

  • 20241104_090631.webp
    20241104_090631.webp
    223.3 KB · Views: 5
Recently I found out that the clip used to lock the radio box digs into the air filter foam on my Savy's filter and leaves a gap where dust can eventually enter the filter itself:

DSC_0004.jpg

DSC_0008.jpg

DSC_0010.jpg


I double-checked that my air filter was fully seated, and it was. So I thought of a fix:

I took a small piece of plastic, heat it with a hair dryer for a while to make it more flexible, then bent it to a 90 degree angle. I then CA-glued the soft side of a velcro stripe on it to prevent rattle. Finally I CA-glued the tab to my air filter cap, like so:

DSC_0025.jpg

DSC_0028.jpg

DSC_0029.jpg

DSC_0031.jpg

DSC_0032.jpg


I hope this tip can help people who still have the stock air filter!
Good fix that bin Avin same prob masen so bin clicking up against radio box button works gud ha be better if I cud actually get the Esav air filter but no chance o that in uk
 

Latest posts

Members online

Back
Top