cen differential mod

[609savage]

ok, I'm wondering what will happen if i do the cen diff mod to only the rear diff and leave my front diff stock...will the gearing stay the same or will it really be different. cause when i read teh article in rcbashers "how to thread" he said that it will lower your gearing..any ideas?

 

[Crash]

ya, cant do that
have to be the same gearing or it will tear it up

 

[frddyj]

ok, I'm wondering what will happen if i do the cen diff mod to only the rear diff and leave my front diff stock...

6, just wondering why you would want to do just the rear instead of both?

 

[Blazer X]

Very bad things will happen. You could do the rear and take the driveshaft from the front.

 

[stellerrc]

Ok Here's why you should not do that.

The ratio's are different and they will tear each other up!! DON'T do that!!! Put both Cen diff's in or as Blazer X said take out the front driveshaft if you change the rear-end gears but kinda defeating the 4x4 effect there aren't you!! PEACE and good luck.

 

[609savage]

fredd...well i don't plan on doing just the rear it is that i bought the one cen diif to try the mod 1st and then i will do the front one once i get the rear finished..i never planned on running cen diff in rear and the stock in the front..i was just curious ...

 

[frddyj]

fredd...well i don't plan on doing just the rear it is that i bought the one cen diif to try the mod 1st and then i will do the front one once i get the rear finished..i never planned on running cen diff in rear and the stock in the front..i was just curious ...

oh yea, makes sense. just don't run a doggy in the front yer all set. shout to us if you need any help with the cen diff. :resp: