Building a Savage from a box of bits

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
Seems like a fun build! Keep the thread updated as you go.
 
Almost there !WP_20170512_16_47_54_Pro.webp WP_20170512_16_48_08_Pro.webp

The engine is a Thunder Tiger S28 and unfortunately the roto start fouls the rear gearbox on the savage, so i have managed to modify a fastrax backplate to use.But need to take to shaft to work on Monday to turn it down on a lathe !
 
Here's my savage build from a basket case.
 

Attachments

  • 20170520_221747.webp
    20170520_221747.webp
    94.7 KB · Views: 3
  • 20170520_221841.webp
    20170520_221841.webp
    106.5 KB · Views: 3
  • 20170520_221822.webp
    20170520_221822.webp
    82.8 KB · Views: 3
Well I've told you all about my adventure of building a savage from basket case so here it is.
 

Attachments

  • 20170520_221856.webp
    20170520_221856.webp
    87.4 KB · Views: 4
  • 20170522_195328.webp
    20170522_195328.webp
    33 KB · Views: 4
  • 20170522_195353.webp
    20170522_195353.webp
    26.8 KB · Views: 4
Very nice build. I'm' in a similar situation. I swapped off some Blade helicopter gear for two Savages, a 4.6 and a 5.9 and a pile of parts. The 5.9 is in one piece more or less and the other is a "work in progress" with a lot of aftermarket bits and pieces.... mostly pieces lol. Should be an interesting way to pass away more than a few winter evenings.
 

Latest posts

Members online

Back
Top