J1A1H
Well-Known Member
- Messages
- 967
This is what your looking at... Thought i would give my 2 cents...
HPI XL conversion: - Get this if you want... but i would definitely get the FLM XL/GCM XL chassis as its much stronger.
HPI suspension conversion: AMAZING EVERYONE SHOULD HAVE THIS
HPI bulletproof dif gears (2): obviously
Xerun/kershaw 9XL BL combo - If you want to build a big truck, i would go against this, considering kershaw just rebrand there motors. This is absolute rubbish IMO... You should go with castle... Depending on how big and heavy your truck will be... you should get an MMM with 1600-1800kv motor... You would have a nice torquey, more efficient motor for your needs.
Hobbywing programming box:
Kershaw Savage XL BL motor mount: Get a stock mount
Kershaw savage V2 battery box (2): get the stock batter boxes... but if you get my chassis, then you can put lipos inside
SPI racing wheels: I RATE THESE WHEELS HIGHLY
PL badlands (2): AMAZING COMBO WITH THE SPI... RIDICULOUS GRIP! just tape them properly before
HPI idler: Depending on what speed you are going for and what motor you choose, you can get this or the 39t idler.
HPI 16t pinion: don't use HPI Pinion, weak stuff... go with Novak pinions (stock is good with shorter chassis, longer chassis means more stress on gears as the front stays down more easily, so you will be ont he throttle harder)
Hitec 7955TG servo: I want one as i think its the daddy.. but i love my ace ds1015
Just my feelings... Dan at kershaw.. did offer me that motor and their new ESC which can supposedly handle 10s... then i found out they are rebranded Hong Kong stuff and i thought i would want reliability in this area.... Last thing i need are things blowing up on me
HPI XL conversion: - Get this if you want... but i would definitely get the FLM XL/GCM XL chassis as its much stronger.
HPI suspension conversion: AMAZING EVERYONE SHOULD HAVE THIS
HPI bulletproof dif gears (2): obviously
Xerun/kershaw 9XL BL combo - If you want to build a big truck, i would go against this, considering kershaw just rebrand there motors. This is absolute rubbish IMO... You should go with castle... Depending on how big and heavy your truck will be... you should get an MMM with 1600-1800kv motor... You would have a nice torquey, more efficient motor for your needs.
Hobbywing programming box:
Kershaw Savage XL BL motor mount: Get a stock mount
Kershaw savage V2 battery box (2): get the stock batter boxes... but if you get my chassis, then you can put lipos inside
SPI racing wheels: I RATE THESE WHEELS HIGHLY
PL badlands (2): AMAZING COMBO WITH THE SPI... RIDICULOUS GRIP! just tape them properly before
HPI idler: Depending on what speed you are going for and what motor you choose, you can get this or the 39t idler.
HPI 16t pinion: don't use HPI Pinion, weak stuff... go with Novak pinions (stock is good with shorter chassis, longer chassis means more stress on gears as the front stays down more easily, so you will be ont he throttle harder)
Hitec 7955TG servo: I want one as i think its the daddy.. but i love my ace ds1015
Just my feelings... Dan at kershaw.. did offer me that motor and their new ESC which can supposedly handle 10s... then i found out they are rebranded Hong Kong stuff and i thought i would want reliability in this area.... Last thing i need are things blowing up on me