Big block in older T-MAXX

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Savage59

Active Member
Messages
70
I've been working on my older T-MAXX'S , since I changed the engines out of my Savage's. So, here's what I 've come up with, I think I have figured how to mount the engines. I ended up moving the trans up one hole. Then change the drive shaft's length. I had to clearance the chassy for the disk brake. The pipe was trick, but I think it's going to work. The other one I'm still up in the air!! You got to love this hobby!!;)
 

Attachments

  • DSCN2927.JPG
    DSCN2927.JPG
    307.1 KB · Views: 9
  • DSCN2928.JPG
    DSCN2928.JPG
    334.5 KB · Views: 8
  • DSCN2929 (1).JPG
    DSCN2929 (1).JPG
    324.4 KB · Views: 9
  • DSCN2932.JPG
    DSCN2932.JPG
    346.2 KB · Views: 9
  • DSCN2933.JPG
    DSCN2933.JPG
    337.5 KB · Views: 9
I did, but if you have a big block with a long clutch shaft it will not fit, both hpi .21 and .25 have the long shaft. The second truck has the BB mount. The first one has a buggy mount. I was trying to make them work without spending a ton of money. ;)
 

Latest posts

Members online

Back
Top