Aluminum Heavy Duty Rear Hub Carrier Orange

[Paul Williams]

I have this part, does anyone know how to fit it and is it easy?

 

[Jam 1]

As simple as removing the old and installing the new, make sure to clean and reoil the bearings....

 

[Paul Williams]

As simple as removing the old and installing the new, make sure to clean and reoil the bearings....

Hi Jam, its not very clear but these are the parts already fitted its not standard HPI Hub Carriers.

 

[Paul Williams]

Hi Jam, its not very clear but these are the parts already fitted its not standard HPI Hub Carriers.View attachment 10799View attachment 10800View attachment 10801

Its similar to this:

 

[Paul Williams]

Its similar to this: View attachment 10802

Would it be good to go?

 

[Jam 1]

Hi Jam, its not very clear but these are the parts already fitted its not standard HPI Hub Carriers.View attachment 10799View attachment 10800View attachment 10801

Well first thing is to remove the wheels and check, it may already have aftermarket alloy hub carriers on it, you can't get a clear pic with the wheels on the rig....

 

[Jam 1]

Would it be good to go?

Yes I would say you already have good parts on the rig, why bother putting orange on unless it is simply for the color

 

[Paul Williams]

Yes I would say you already have good parts on the rig, why bother putting orange on unless it is simply for the color

Your right Jam it was for the colour and to give me something to do, if you think there is no point i shall leave the old ones on! Haha.

 

[Gazzman]

I have this part, does anyone know how to fit it and is it easy?View attachment 10798

They fit like this Paul.

With them fitted you don't need the rear turn buckles so these can be removed. The 3 holes in the top of the hub are to allow for the camber of the wheel to be adjusted. The centre hole is the best one to use with it giving the rear wheels a small amount of negative camber but seeing as yo have adjustable top arms you can fine tune your adjustment to what you what.
These parts only fit the rear by the way.

 

[Paul Williams]

They fit like this Paul.
View attachment 10803View attachment 10804View attachment 10805View attachment 10806View attachment 10807
With them fitted you don't need the rear turn buckles so these can be removed. The 3 holes in the top of the hub are to allow for the camber of the wheel to be adjusted. The centre hole is the best one to use with it giving the rear wheels a small amount of negative camber but seeing as yo have adjustable top arms you can fine tune your adjustment to what you what.
These parts only fit the rear by the way.

Thanks...

 

[Gazzman]

These are the 2 parts it will replace.

 

[Paul Williams]

These are the 2 parts it will replace.
View attachment 10808

Ok.

 

[Jam 1]

Your right Jam it was for the colour and to give me something to do, if you think there is no point i shall leave the old ones on! Haha.

Well adding color is a personal choice, after all it is yours to express your style on, what I say matters little, that is what is so fun about the hobby, making the rig yours...