Aluminum c-hubs and aluminum knuckles ?

[DGCON]

Just wondered what you guys think of these ?
I'm ordering a set of the integy rear HD hubs this week and would like some input on these ? I'm kinda thinking to stay stock on the front because if the aluminum bends i'm out of some serious cash . Strictly bashing
Thanx

Ripped it off on a chain link fence

 

[maximusraylius]

nice carnage... integy rear carriers are the only integy part i use. they actually hold up great and eliminates the tie rod ... i aslso use golden horizons front c hub and nuckle and love them ... thats bout the only upgrades i ever use on my stock bashers ...http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXWSY0&P=7
ohhh i also use this mixer..
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXTTH1&P=ML
discontinued at towers but these are the ones i use
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXEVM5&P=7
and these but not purple lol
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXEMN0&P=7

totally stopped breaking things off the arms once i started using these parts .. good luck..http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXEMN0&P=7

 

[SwampDawg]

i went alloy for the uprights and knuckles long ago,...best thing i did for my savy!

 

[Combuster]

btw i would get rid of that air filter and put the stock or motor-saver on because those don't work very well for off road

 

[DGCON]

I got a motorsaver air filter now , I'm doing a complete re-build on my XL. Thanx though

 

[DGCON]

Should have some pics coming once i get my chassis delivered

 

[DGCON]

Thanx for the input guys

 

[Mickey]

DG i have run the integy rear carriers and front castor blocks for about 2 years now with no failures. i do still run with the stock knuckle tho that way i have a fail point before the control arms.

sorry for the crappy pic but its the best one i have that shows the way i set mine up

 

[DGCON]

Just ordered the rear hubs and front castors off the bay . $20 cheaper than tower with shipping . Thanx for the advice guys