Search results

  1. S

    LRP 28 spec 3

    I have an lrp 28 with a 3 speed I tryed a 15/49 to much bottom end and a 17/47 still to much bottom end the motor is evil but I still need more top end can anyone recommend any thing Thanks
  2. S

    Msr8

    I Have The Msr8 On My Savage And I Keep Bending The Shafts What Mounts Can I Get To Space Them Out The Screws Come Out Of The Arms And They Tend To Rub On The Arm And The Turn Buckle Can Anyone Help Me Out Thanks
  3. S

    MSR8 shocks

    msr8 Yes Type is integy msr8 on ebay and scroll down to the bottom and you will see purple msr8 for savage and savage X. Integy Purple Heavy Duty MSR8 Shock Set Savage 25 X (8) (#200111305015)
  4. S

    3 speed shifting

    I put a 3 speed upgrade into a savage X and it seems not to shift into first it is stuck in second or prob 3rd does anyone know what the settings are from 1st to 2nd and 2nd to 3rd I hate having to take this thing out to adjust 1st -2nd
  5. S

    Damper Upgrade???

    shocks Go with the integy msr8 4mm shafts
  6. S

    STS .30 rev2 pipes

    I have tryed to richen it up then it wont clear itself out the motor is sealed and everything I am at a stand still!!
  7. S

    STS .30 rev2 pipes

    pipe Thanks I will try to adhust the header any suggestions on tuning this thing seem to want to run about 300 degrees ?
  8. S

    STS .30 rev2 pipes

    I have the sts .30 rev2 and it has the sts 702 pipe and header but the header is wrong or something it hits my shock and also I really don't like it to much I need a topend pipe what do you guys suggest the header should clear the shocks maby this pipe is made for the left side I don't know??
  9. S

    Piggy Back oil...

    msr8 don't the msr8 shocks come already filled and assembled ready to be installed?
  10. S

    engine stalling

    sts .30 Check And Make Sure Your Header And Pipe Gasket Are Sealed And Not Ripped That Happend To My Sts 30 And It Was Doing The Same Thing
  11. S

    Throttle And Brake Linkage

    DOES ANYONE HAVE A FIX FOR THE STOCK THROTTLE AND BREAK LINKAGE FOR A SAVAGE THE STOCK ONE IS SLIPPING AND WONT LET THE THROTTLE OPEN ALL THE WAY!! iT IS THE LITTLE BLACK AND BRASS PIECE THAT SITS ON TOP OF THE SERVO!!!THANKS
  12. S

    Pictures

    Pics Thanks I'm new to this whole picture thing any help is highly app.
  13. S

    Pictures

    I finally got some pics on here guys check them out let me know what you think!!!
  14. S

    glow plug prob!

    glow pulg Yes really seems to be running lean try riching it up a hair
  15. S

    STS .30 rev2

    Ok so I whould go to 30% nitro with my sts 30 rev2 and what should I run for shims in this motor?????? I am ordering the sts pipe as we speak!!!
  16. S

    STS .30 rev2

    sts30 I'm running trinity monster power 20% nitro It warmed up a little outside today and i seem to have it running a bit better should I remove any of the head shims will it make it run any different>>????
  17. S

    STS .30 rev2

    Sts 30 The fuel is brand new and when I richen the hsn it seens to want to really bog
  18. S

    STS .30 rev2

    I got my new motor broken in and it starts and runs great but at wide open throttle it seems to scream for a sec then it acts like it is loosing fuel but it has a good smoke trail and its running around 200-220 degrees any suggestions???
  19. S

    Sts .30 Rev2

    Ok I just bought my new motor I was wondering what clutch I should use that will hold up and also what glow pug to use for break in and for bashing! I went with the sts over axial because of price and I heard alot of good things from the sts rep good customer relations!!! Also what gearing...
  20. S

    motors

    Yes thanks guys that does help me out!!!!!
Back
Top