Search results

  1. B

    advice on new wheels and tires

    i think i found the tire i want. http://www.teamlosi.com/newprod/2003prods/zombie.htm ill go with pro-line offset rims. so many tire and wheel combos to sort through it really does take alittle time. lol
  2. B

    advice on new wheels and tires

    Hi i have a savage 21 truck i just put an axial .28 in.by the way the motor rocks! but, its time for new shoes. i was running stock t-maxx tires on rpm stablemaxx rims. i switch to imex jumbo maxx tires but they are really heavy. the jumbo maxx tires hook up well but they are tearing my truck up...
  3. B

    getting a new motor

    I have about 10 tanks threw the motor now. the axial .28 runs great. i am having trouble getting 2nd gear working so I'm going to do the replace some of the 2 speed parts. the truck dosn;t wheelie but it has alot of power. i think once i get 2nd gear to work again the motor will give me a lot of...
  4. B

    getting a new motor

    break in is going much better today! by the time it got maybe 1/4 way into the 2nd tank it just stayd running and got hot. the motor stayed about 260ish all the way through the 2nd tank. took 2 hours to get through the tank but it stayed running and didn't overheat so I'm happy time for a 3rd...
  5. B

    getting a new motor

    i only have about 1 tank threw the motor now. i came in since it started snowing rather hard. i have the motor at a fast idle and it sounds good but just dies.some times it runs for 45 sec.- 1 min other times about 15 sec. seems alittle strange but its been a long time since i broke in one of...
  6. B

    getting a new motor

    i got a chance to start the motor up today. i can;t seem to keep it running.it runs for s short bit then stalls. the highest temp i got was 210f. i burnt about 1/2 tank and a sware 1/4 of that is in a puddle under the pipe. i am useing an mc8 plug and its about 40f with a 20 mph wind. before i...
  7. B

    getting a new motor

    thank you for the advice on break-in. i like the idea of a longer break-in. the new motor is in the truck now and set-up maybe tomorrow i'll get it out and start the breakin. i will also leave the restrictor out i already put the filter on without it. :) ill post back again after i start it up.
  8. B

    getting a new motor

    hi i got my new motor now and I'm working on sealing the engine. i noticed the mtor came with restrictors to insert into the carb air opening. do i use these for break in? the directions don't say to use them. only to idle the motor for 2 tanks and run it 1/2 throttle for 2 tanks. what is...
  9. B

    getting a new motor

    i also use trinity moster hp and i like the fuel. i was planing on staying with the fuel. i will get the McCoy mc8 plug with the motor tonight. the stock pipe that came with my savage was not a tuned pipe. mind you i bought this truck 5-6 yrs ago when the savage 21 was first introduced. thank...
  10. B

    getting a new motor

    hi I'm replacing my picco .26 outlaw with an axial .28. I'm going to order the motor tonight. i plan on reuseing the ofna 3 shoe clutch and flywheel. is this a good idea or should i buy all new? the clutch and flywheel are in great shape yet. also what plug would be the best the break/run the...
  11. B

    melting slipper clutch pads

    I just got the chance to run the truck today after replacing all the slipper pad parts. the truck worked great! i ran about 2 tanks of fuel without any problems. I wish i would have thought to replace all those parts a bit sooner. Thank you for the help.
  12. B

    melting slipper clutch pads

    I have fixed all the broken parts. the truck seems to roll free. rather then just replacing then pad and spurr gear i am going to replace it all. the steel pad is also scored and maybe its time for a new spring. after this ice storm i will get the hobby shop. i will post if all new parts and...
  13. B

    melting slipper clutch pads

    hi i am new here. i have a savage 21 with a pico .26 motor. i have not used the rc at all for almost 3 years now but am trying to get back into the hobby. sadly i left myself a couple of problems. i am mealting slipper pads. the plastic spur gear itself is fine. the teeth and in great shape...
Back
Top