Search results

  1. S

    Back after a few years... Rebuild

    i've not been involved in much rc stuff for the past few years because our rc group sort of disappeared lol. But I've been bashing myself in parking lots and stuff like that. I have a Traxxas Mini Summit 540, Ofna Hyper 7, Losi Mini LST, Savage Flux and I also have a Savage flux roller...
  2. S

    86097 Drive Gear broken

    This it the top most one on my Flux tranny. Was just doing some light bashing in the dirt. Is this the best upgrade for this gear? http://www.tcscrawlers.com/HPI-HD-DRIVE-GEAR-18-23-TOOTH-1M-102514-p-17468.html
  3. S

    Fuel Tank Problem

    I think the issue with my idle has to do with the fuel tank. No matter how I tune it. Just give it a tiny throttle, and then press brake. The idle stays up for about 4 seconds and then starts coming down. It's either I have a leak from the engine to the exhaust or something. When you...
  4. S

    Issue with idle...

    about half gallon into my new SH .28. Has been experiencing this issue since the beginning. When the engine first starts, idle is good. Drive for couple seconds and come back, idle goes up. I then try to lower the idle, the ldle goes back down again, drive again, come back, idle goes up...
  5. S

    Savage Screw Kit

    Can someone recommend me a good Savage Screw Kit that is not too expensive. I bought a screw kit off ebay but it only includes metal to metal screws. No plastic to plastic screws. Thanks. Ebay Link would be appreciated.
  6. S

    Best bang for the buck engine..

    My Savage has been sitting there for couple months now. The weather is getting warmer. Now looking for an engine... Here is what I know so far: Axial .28, SH.28 8 Port, Picco .28, LRP .28 Axial and SH are pretty cheap.. Picco .28, LRP .28 will come to about $200. (In Canada, Shipping...
  7. S

    Recommendation for a new engine..

    The only two engines that I know are in my price range are the Axial .28 and the Mach .28. It's either going to be for my Savage or LST2. I don't know which one to choose. Or maybe other alternatives in the price range?
  8. S

    Pinch test question

    If the engine rpm increase dramatically, it indicates that the low-speed setting may be too rich. So basically if the low speed is too rich, fuel will build up in the case which will decreases the RPM because of excess fuel so when you pinch the line(Cutting off fuel), the case will clear up so...
  9. S

    Is this glow plug any good?

    http://www.thundertiger.com.tw/product/9775.html I'm using it right now and I think it doesn't work that good because I have been having trouble starting ever since I replaced the older one with this. It says it's designed for helicopters, so I'm not sure if that is the problem. But the...
  10. S

    Can't blow fuel into the engine. Serious

    I haven't touched my Savage for couple weeks now and I was trying to get it started today. Never got it to start, everytime I blew fuel into the engine, it came out of the mid speed needle. I don't think it even reached the engine because when I took the glow plug out, it was very dry...
  11. S

    Brake touching clutch bell.

    I have the dual stainless steel disc brake and it always touches the clutch bell. I got my Savage used, so I don't know if they have the same problem with the stock brakes. I heard that if you switch back to this one, it will solve the problem? Can anyone confirm this.
  12. S

    How to check if one way bearing is ok...

    My pull start slips all the time, but I still can get the engine started pretty easily. I don't know if it is the pull start or the one way bearing. I have couple questions. Where is the one way bearing? I tried to turn this thing manual and because of the engine compression, I wasn't...
  13. S

    Rebuilding old shocks...

    I believe all 8 of my shocks are leaking somehow, the shocks are really old. Which part should I replace so that the oil does not leak out. Or is it cheaper to replace with the stock shocks.
  14. S

    Brake seems to touch the clutch bell.

    After changing from 15T/52T to 15T/49T. I notice that the brake is touch the clutch bell, just tiny bit. I remember seeing a thread about it and can't find it anymore. Any ideas?
  15. S

    Gearing for Axial .28

    I'm currently running 15/52, which I think is pretty good. I stripped the 52t slur gear today and was thinking about dropping in my spare 47t spur gear. Do you think it is a good combo?
  16. S

    Unsure about the pinch test..

    So you pinch the fuel line as close as possible before the golden metal entry into the carburetor right? How many seconds should it run? Some people say 3 seconds, some say 4....I'm really unsure.
  17. S

    Can somebody explain the concept of pinch test.

    PINCH TEST- Make a couple top speed passes, bring it in and pinch off the fuel line near the carb. Start counting 1...2...3... It should run for about 3 seconds before it revs and dies. If it runs longer you need to lean the LSN. If less than 3 seconds you need to richen the LSN. When...
Back
Top