Search results

  1. faisalbasha

    voltage and mAh - LiPo balancing Q

    I've had 2s batteries without balancing for years and I've had no problems. I balanced them to check if the cells are the same and they were. This was once in 3 years
  2. faisalbasha

    voltage and mAh - LiPo balancing Q

    i was told by my local hobby store that i didn't need to balance my 2s batteries, just the 3s.
  3. faisalbasha

    Servo Choice

    HS-5995TG very strong and very fast.
  4. faisalbasha

    Unpredictable signal loss

    I'm experiencing signal loss with my truck. I got new batteries, new esc with brand new cables and wires, new receiver. The signal loss starts at around 20-30 feet. Sometimes the truck wants to run away. I have no idea what the problem is. The servo is good too.
  5. faisalbasha

    AB mods

    Sorry about that. I realized after.
  6. faisalbasha

    AB mods

    he did my sts .30 and pico .28 (monster)
  7. faisalbasha

    wheels and nuts

    Ahh... Alright my friend. I got ya.
  8. faisalbasha

    wheels and nuts

    Those are the stock nuts those are the ones I have.
  9. faisalbasha

    wheels and nuts

    yes yes i know but those are the only ones i can find that work.
  10. faisalbasha

    wheels and nuts

    the only ones i can get are the warlock 17mm hex (first link) they cost around $60... hard times...
  11. faisalbasha

    wheels and nuts

    I didn't think about the hex when i bought the wheels which was not smart. will these fit as well? http://www.ebay.ca/itm/Integy-Aluminum-17mm-Wheel-Hex-4-12mm-Offset-T-Maxx-Revo-Summit-C25090ORANG-/391306832980?hash=item5b1bb46c54:g:PhUAAOSwYHxWMmRl the first ones are a little too much money.
  12. faisalbasha

    wheels and nuts

    whats that mean
  13. faisalbasha

    wheels and nuts

    my stock savage flux hp nuts are almost completely worn out making it hard to un/screw them. i recently bought these tires and wheels. http://www.ebay.ca/itm/Pro-Line-1198-13-Big-Joe-II-3-8-Tires-Wheels-2-T-Maxx-Summit-E-Revo-/301135842946?hash=item461d184e82:g:2QkAAOSwPe1T93TX the question...
  14. faisalbasha

    Overheating issues

    I'm running big joes 2.....theyre big and the front tires balloon
  15. faisalbasha

    Overheating issues

    Could it be that the gear mesh is tight?
  16. faisalbasha

    Overheating issues

    The motor becomes really hot as well. I have the leopard 2650kv. I installed a center diff with 46t spur and kept the stock pinion.
  17. faisalbasha

    Overheating issues

    My savage contains a mid diff with 46t spur. And a 20 or 25t pinion. Not too sure...
  18. faisalbasha

    Overheating issues

    My quicrun 150a is overheating with only 4s. Is this possible ? I had to wait a couple of minutes for it to cool down. I don't think 6s is a good idea in this case. My savage contains a mid diff with 46t spur. And a 20 or 25t pinion. Not too sure...
  19. faisalbasha

    wire protection

    I got some and I applied it. Here is a picture of my work. I wrapped the tubing with tape as well for extra protection.
  20. faisalbasha

    wire protection

    Where could I possible find this product?
Back
Top