Search results

  1. Meatwad

    to integy or not to integy that is this ?

    I've had good luck with the integy rear tie rod eliminator.. basically a lockout. Would not have even tried it without the advice of some members here. All my other integy experiences have been negative, not just savage stuff either. Gave up nitro when a local guy let me try his new flux hp at...
  2. Meatwad

    WTB Heavy duty axles

    Agreed. Although the rtr x had the standard black and x ss came with shiny hd bones and cups. Had alot more luck with the shiny hd cups than the bones. It was nice when the shd stuff came out on the XL. Funny story, i was using standard diff cups and bones on some XL axles on my rtr x and...
  3. Meatwad

    Diffs swap?????

    Imo stick with the bp diffs and go up on CB/pinion. When i went bl, the stock diffs went in 2 packs even after being shimmed. Sent from my crappy DROIDX via Tapatalk
  4. Meatwad

    Local Hobby Shop

    I had almost the same ending to a conversation about turnigy lipos with one of the new employees at my lhs. "You get what you pay for and come back after 10recharges to buy a real LiPo" Yeah ok kid its been over a year on this batch of lipos, stay in school and cut your hair. Sent from my...
  5. Meatwad

    How did you end up with a savage?

    Towards the end of '06 i went to my lhs looking for a new monster after my mini mgt snapped in half. An x was sitting on the 'broken' shelf in the back of the store, a customer ride. Basically it was a week old with a broken pin in the crank. Lhs owner contacted the customer and $250 later it...
  6. Meatwad

    Local Hobby Shop

    I gotta say I'm lucky for the most part. The lhs close to my work has alot of what one would consider race parts (tires/wheels, bodies, paint, bug/trugg parts etc) but very little savage parts if any. Except for the interchangeable Hellfire parts. Now the lhs by my work is basically the...
  7. Meatwad

    Post your tire and rim setup pics

    Trenchers on axial wheels. Awesome tires that seem to work just about everywhere. About the same weight or a tiny bit heavier than terrapins on stock wheels.
  8. Meatwad

    High end car audio 2011

    In the past I picked up some suitable drivers, caps, coils and resistors from partsexpress.com. Made up my own component set and passive 2way xo's with a zobel network. If my pant legs get blown around with minimal distortion, it was enough for me. For subs, almost anything suitable for an ib...
  9. Meatwad

    Bearing failure!

    The one bearing included is intended for a plugnplay experience being that the id for the ring side is smaller. Merry crimmas too!
  10. Meatwad

    Bearing failure!

    I highly recommend the bp diffs, lost a couple bearings on the bp's and they lived through it. My standard diffs always ended up like in the pics
  11. Meatwad

    DiRT 3 - DC Compound Gymkhana Trailer

    Heh yep reminds of his vids, dude is a badass. Hope they get more sc action in too
  12. Meatwad

    Integy Super Duty Turnbuckles T7090 & T6970 for Savage X

    +1 to the letter.
  13. Meatwad

    Well...The project begins

    That, sir, was a good deal in that case
  14. Meatwad

    Well...The project begins

    Were they bp or nitro diffs? The only xl's with bp diffs are the xl+2.4ghz radio. Most ebay auctions don't specify this and the sellers don't even know the difference
  15. Meatwad

    Savage 21 to an XL, is it possible?

    Basically its your money :) If you decide to go to xl, you will need... axles, bones, diff output cups, tvps, center to rear bone and 3spd. Might as well go bp diffs too, its a worthwhile upgrade
  16. Meatwad

    I need some good 7.4 2s batteries

    For sure. I've got deans on my 2s and 4s packs. In some cases the wire is a bit thick (8ga), I usually cut some strands off to fit it on the terminal. Haven't had an issue
  17. Meatwad

    I need some good 7.4 2s batteries

    Those should be ok as far as amperage goes. But as far as wire placement in the flux batt box. It may or may not be a problem
  18. Meatwad

    I need some good 7.4 2s batteries

    http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=15022 Those are the 4s packs that fit inside the chassis behind tranny with kershaw dual motor mount. But since this thread is about the 2s packs.. http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idproduct=11613 Don't...
  19. Meatwad

    I need some good 7.4 2s batteries

    I can second the hk lipos. Had great luck with turnigy and zippy as long as you spring for the higher c packs. Recently picked up a couple 4s packs for my xl conversion for a hair under 90 bucks from the new usa warehouse. Prices can't be beat
  20. Meatwad

    diff bearing gone out

    I've had good luck with avid bearings. Also most of their steel revolutions bearings are a buck
Back
Top