Search results

  1. U

    Chamber upper arm lenght.

    I have savage x 4.6 chasis, now i want to set chamber at front but cause i don't have gauge i thought that someone could provide me lenght of uppper arm for -1 or -2 degres chamber.Blue or green line on picture provided.
  2. U

    Woobling bevel gear

    Cause those 4 sucker are loctited as hell,imposible to get them out..what can i say noob stupidity..
  3. U

    Woobling bevel gear

    Ya i have new bearings.I just want to open them clean and put silicone oil in there but now bevel gear woble like 0.5mm let and right. Looks like i destroyet alloy cups with heating or either calipers i just don't want to repeat same mistake..
  4. U

    Woobling bevel gear

    Me again with problems I put diff together to shim, and found out that if i spin bevel gear with cup on screwdriver bevel gear wooble around 0,5mm is that normal(i think it is not)? Looks like it is problem in alloy diff cup,cause i have one new cup and no problems with it.I have problem...
  5. U

    K5.9 Glow Plug

    What do you guys think about this glow plug for 5.9 mill using with 20% or 25% nitro content.I'm chosing betwen this and hpi R5 Dynamite monster
  6. U

    how to care for your batteries

    Li-po its good to fill them to 70% and then leave them(don't leave them discharged), but lipos in any case lose capacity over time and cycles its chemistry.And don't make necessary cycles on them. Ni-mh need to be charged at time to time cause they suffer from selfdischarging and leaving them...
  7. U

    Savage Truck Diff shimming 101

    I know again someone with hard head(more brain but ok):whipit: I inspect my diffs and found some slope so i want to shim them,found a lot of ways to do it.But in many howtos they shim that shim is touching both races of ball bearing which i dislike. So i am asking is this is rite to...
  8. U

    After snow bashing

    Ok thanks guys..i think i am not gonna bash alot on snow...it looks like ist realy good for trucks..
  9. U

    After snow bashing

    It is winter time here and snow is gonna fall soon(i hope). And was wondering what you guys do with savage after bashing on snow.Clean them and let it sit close to heat source so it dry quickly, or smth needs to be lubed if so with what? I know :lmao:
  10. U

    MY IRC 1"+6mm LCG CHASSIS+MID TANK KIT+LST SHOCK BUILD

    Nice build. What is the truck weight?
  11. U

    Any ever use Zippy or Turnigy Batteries

    They are good and rhino also (brand names are better but costly).There is yust one thing those lipos zippy,rhino they are litle C overrated.
  12. U

    Engine stalling again

    Ya i have a plan to tune this litlle beast at the end of the week. How much fuel you get trough your mill..? Sorry about my english..
  13. U

    Engine stalling again

    MikeK nope the same thing starts and runs great but when i take throtle off from wot comes to idle at the same moment idle rpm drops and shut down engine, but when rpm drops if i blip throttle i could prevent shuting off (idles then fine). But ok probably is a tunning issue..
  14. U

    Performance tuning, let the engine tell you.

    I know this question might be stupid but.. Yust one question do you change idle needle settings after/between tunning or yust 1mm gap and that it is it?
  15. U

    Engine stalling again

    Interesting same mill,same problem..Did not have a time to mess more with needles..
  16. U

    Performance tuning, let the engine tell you.

    This is one of the best threads:mug:.With video it will be perfect.
  17. U

    Gearing your rig, the effects there-in.

    Ql great i think i am gona buy 49 spur and 15cb also have 17cb then try.
  18. U

    Gearing your rig, the effects there-in.

    I run stock wheels and tires. Then i should try 49/16(can i count on some wheelies if i try hard not that i am so into wheelies but at time to time i want to try). I do not want to buy something unuseful..
  19. U

    Gearing your rig, the effects there-in.

    I alredy asked this question in another thread but at the moment i do not want to buy 3speed tranny. I own savage x 4.6 with 5.9 mill(i know it is not the best, but i have it..). What gearing you suggest for more acceleration(torque) over speed(still want some decent speed). At the moment i...
  20. U

    5.9 kinda impressed

    Yeah i know but i bought this litlle used savy x 4.6 with 5.9 engine, so i am gona using it till to death, then replacing with other engine(also this is my first nitro engine).
Back
Top