Search results

  1. N

    should I break it in

    Banging my head against the wall with trying to tune an XL I got for free. Would it benefit me in anyway if I tried going through the break-in process again? I do not know if the truck was broken in properly or broken in at all. Jay
  2. N

    2 speed tranny question

    According to the manual, stock shift setting is 1.5 turns in. Is it abnormal that I had to turn the screw 3.5 turns in to have it shift within 15feet. Is there a possibility that I may have to replace the spring in the transmission assembly? Jason
  3. N

    another wheely question

    so my savage X 4.6rtr doesnt do wheelies. Here is my info: 1. hpi polished pipe 2. 47 spur gear, 17 CB 3. 35wt silicone in the shocks 4. lowered with fuel tubing in the shocks 5. HSN tuned at 230f. if i lean it out half a revolution the engine chugs at wot. LSN at a quarter turn in 6...
  4. N

    need some help

    I was just given a savage xl and after firing it up and trying to tune it, I have a couple questions. I do not know if the vehicle was broken in properly so please keep that in mind. The xl fires up almost right away, but when I hit the throttle there is a considerable amount of lag and...
  5. N

    noob needs help

    I'm new to the R/C world and I decided owning one savage wasnt good enough, so I bought another one. Before tuning the 2nd savage, which I bought used, I reset all the dials back to stock, replaced all the lines, and added a tuned hpi pipe. I followed the same procudere as my 1st savage and...
  6. N

    Gas tank prevents WOT

    I have a RTR 4.6x and when I don't have the gas tank on the throttle body can open all the way. When the tank is on the throttle body hits the side of the tank and prevents it from opening all the way. Any suggestions to fix this? It has the stock tank location and I just replaced the tvps...
  7. N

    SS brakes and vented CB = problems

    my vented CB and disc brakes are intefering with one another. The disc actually sits in the vent and prevents the CB from spinning. Also, I tried putting the red fiber pads on and the CB does spin at all. Any Ideas? Jason
  8. N

    spur gear question

    I cant exactly remember, but when you hold the savage in the air and spin the tires does the spur gear spin as well? Jason
  9. N

    stripped caliper screw

    wondering if anyone has a quick fix for this problem. The screw that holds the caliper in keeps backing out by itself causing my brakes to rest against the CB. Used the search, but theres too many pages to read through LOL. TIA Jason
Back
Top