Recent content by SAVAGESMASH

  1. S

    LRP 28 spec 3

    I have an lrp 28 with a 3 speed I tryed a 15/49 to much bottom end and a 17/47 still to much bottom end the motor is evil but I still need more top end can anyone recommend any thing Thanks
  2. S

    Msr8

    I Have The Msr8 On My Savage And I Keep Bending The Shafts What Mounts Can I Get To Space Them Out The Screws Come Out Of The Arms And They Tend To Rub On The Arm And The Turn Buckle Can Anyone Help Me Out Thanks
  3. S

    MSR8 shocks

    msr8 Yes Type is integy msr8 on ebay and scroll down to the bottom and you will see purple msr8 for savage and savage X. Integy Purple Heavy Duty MSR8 Shock Set Savage 25 X (8) (#200111305015)
  4. S

    3 speed shifting

    I put a 3 speed upgrade into a savage X and it seems not to shift into first it is stuck in second or prob 3rd does anyone know what the settings are from 1st to 2nd and 2nd to 3rd I hate having to take this thing out to adjust 1st -2nd
  5. S

    Damper Upgrade???

    shocks Go with the integy msr8 4mm shafts
  6. S

    STS .30 rev2 pipes

    I have tryed to richen it up then it wont clear itself out the motor is sealed and everything I am at a stand still!!
  7. S

    STS .30 rev2 pipes

    pipe Thanks I will try to adhust the header any suggestions on tuning this thing seem to want to run about 300 degrees ?
  8. S

    STS .30 rev2 pipes

    I have the sts .30 rev2 and it has the sts 702 pipe and header but the header is wrong or something it hits my shock and also I really don't like it to much I need a topend pipe what do you guys suggest the header should clear the shocks maby this pipe is made for the left side I don't know??
  9. S

    Piggy Back oil...

    msr8 don't the msr8 shocks come already filled and assembled ready to be installed?
  10. S

    engine stalling

    sts .30 Check And Make Sure Your Header And Pipe Gasket Are Sealed And Not Ripped That Happend To My Sts 30 And It Was Doing The Same Thing
  11. S

    Throttle And Brake Linkage

    DOES ANYONE HAVE A FIX FOR THE STOCK THROTTLE AND BREAK LINKAGE FOR A SAVAGE THE STOCK ONE IS SLIPPING AND WONT LET THE THROTTLE OPEN ALL THE WAY!! iT IS THE LITTLE BLACK AND BRASS PIECE THAT SITS ON TOP OF THE SERVO!!!THANKS
  12. S

    Pictures

    Pics Thanks I'm new to this whole picture thing any help is highly app.
  13. S

    Pictures

    I finally got some pics on here guys check them out let me know what you think!!!
  14. S

    glow plug prob!

    glow pulg Yes really seems to be running lean try riching it up a hair
  15. S

    STS .30 rev2

    Ok so I whould go to 30% nitro with my sts 30 rev2 and what should I run for shims in this motor?????? I am ordering the sts pipe as we speak!!!
See more
Back
Top