Recent content by IamSavage

  1. IamSavage

    29cc engine

    Hi all need some help I am sure some where there is a post however I have just got myself a Baja and a new 29cc lump for but what I want to know is the following I bought a 30mm stuffed crank 1mm cooper gasket And some other bits Now the question is, is if I put the 30mm crank in...
  2. IamSavage

    Radio trouble please help

    Glade u got it sorted buddy
  3. IamSavage

    Radio trouble please help

    i had this problem your getting electric interfearence what i did was remove the reciver from the box were it sits as fair away from everything and see if it does it again if it don't then before you put the reciver back rape it in electircal tape i run dx3c with a spektrum reciver and like i...
  4. IamSavage

    Ok.......what tha heck!

    Same here I have the alloy casing and upgrade to 29/9 bullet proof like I said never looked back
  5. IamSavage

    What are your thoughts?

    i find when i have run an engine in only run her for the first few tank in short runs not for a hole tank like i run it for about 2 mins runs and every now and then check the temp of engine and i found the first few tank it run high on temp due to everything is tight. like i said i run it till...
  6. IamSavage

    Ok.......what tha heck!

    mickey when i got my savage x new mine come with the 43/13 but i change mine to 29/9 much beeter now never had a problem since
  7. IamSavage

    no power to the front wheels??

    front diff i had same problem so up up graded mine to bullet proof ones and never had a problem
  8. IamSavage

    Help with sizing up

    Hi all and merry Christmas need some help with some bits. What it is, is my farther in law is wanting to make from scratch a rc fire truck witch will be fully working even pumping water and so on, so what I am asking is what size crewler diff and axles r as he wants to have axles like a big rig...
  9. IamSavage

    Axial 28rr spec 1 nitro engine

    sweet thank guys i will do that mickey i will use the 8.5
  10. IamSavage

    Axial 28rr spec 1 nitro engine

    so what your saying is i have to use them
  11. IamSavage

    Axial 28rr spec 1 nitro engine

    I believe they go on inlet of carb
  12. IamSavage

    Axial 28rr spec 1 nitro engine

    Hi all I'm sure some where on the forum it covers this topic anyway I just got a axial 28rr engine and I have 2 plastic sleeves one of witch is 8 and the other 8.5 can anyone tell me what there for Thanks guys Any help would be good, I will hope to be the first merry Xmas to all and a...
  13. IamSavage

    What am I doing wrong?

    That's good to hear that I'm doing something right for a change lol so as long as it runs got good smoke from her and I can run it till the tank is nearly empty then I'm good that put my mine to rest
  14. IamSavage

    Roto start

    Hi all could anyone tell me were I can get a roto start kit for a hong nor .36 force engine as I just got the engine as it was cheap witch now is looking like I should not of bothered the only reason is I seem to kill pull starts lol
  15. IamSavage

    What am I doing wrong?

    I thought u can only go to about 260 in temp, but ur saying 295 is not that bad, u learn something new every day also on the temp question what is a good all round temp as mine gets to 185 on an warm day and 225 on and hot day I think the highest it ever been is 238 and that wasabi really hot...
See more
Back
Top