Recent content by Heshup

  1. Heshup

    Savage X SS Axle play?

    I took everything a part and all looks good as far as the right parts and using all the parts. megabyteme yes the bearing did seat right the first time. I made sure of that. Upon checking the specs on the axles I think I found the problem. The axle should be 8X9X44mm and mine are 8X9X45...
  2. Heshup

    Savage X SS Axle play?

    I figure you might do that, but I feel you would be taking the slack out of the dogbones that may be needed. I don't know if one could get away with a no slack in the dogbone. I don't think so. I think I am going to try some shims on the axle to take up the slack. Could put the shims behind...
  3. Heshup

    Savage X SS Axle play?

    I used the o-rings on the dogbones that went into the cup joints on the differential per say the manual and they still be a good bit of play on the dogbones, but I can see that would be ok. One would not want that to be slack free. This play is coming from the axle between the pins and bearings...
  4. Heshup

    Savage X SS Axle play?

    This has been bothering me since I put the tires on. I have about .90mm give or take a few play in my axles. After I mounted the tires I saw that I could move them in and out. When looking as to why this is going on I see that the axles have that much play. The play is between the pin and the...
  5. Heshup

    X SS shock assembly question

    Thanks for the help.
  6. Heshup

    X SS shock assembly question

    After assembling the shocks and on the truck I feel they are way too weak. The question is when one fills the shock with shock oil where should the shock shaft be all the way in or all the way out? Mine were about 1" from being all the way in. I did the bleeding of the air. Thanks.
  7. Heshup

    What's everyone's name????

    My name is Stone. I live in Starkville Mississippi. :shocked: I am 52 years old :shocked: I am disabled and been building and fiddling with computers for a few years. New to this RC stuff but having a great time building my first MT. I am sure this will not be the last. Wife wants a RC boat that...
  8. Heshup

    A real newbie Savage X SS question! Flywheel, clutch and brakes.

    Sure did. It be a shame that the manual don't give a bit more info on the adjustments. I took the brass bushing shaved it down just a bit. There is very little play in the CB. Can hardly tell it Thanks for your time and help. I do appreciate your help. Stone
  9. Heshup

    A real newbie Savage X SS question! Flywheel, clutch and brakes.

    Here are two from the manual.
  10. Heshup

    A real newbie Savage X SS question! Flywheel, clutch and brakes.

    Sure can on the pic. Just give me a few and I will have them. Thanks.
  11. Heshup

    A real newbie Savage X SS question! Flywheel, clutch and brakes.

    I am at a stand still with the engine. I have no clue about the Clutchbell installtion. When I go by the instructions it just don't feel right. You know when you do something you feel good about it or you don't. The way they tell it as far as the parts I have no problem with 1: Flywheel...
  12. Heshup

    A real newbie Savage X SS question! Flywheel, clutch and brakes.

    Savage X SS Need to know just how tight one should do the pilot nut for the flywheel. On the clutch I bought the Nova shoes and Mugen springs and using the stock flywheel and clutch bell. Need to know do I use the spacers under the shoes. Spacer under the bottom clutch bell bearing? I...
  13. Heshup

    Savage X SS Help Trick my Truck.

    Have received verything ordered last week but the super hot shot 2, hump-pack and foam inserts. It"s been a hoot putting it together. The wheels and tires have to go. Been taking a lot of photos as I am doing the build. trashard, thanks for the heads up on the tank. Thanks for all the...
  14. Heshup

    Savage X SS Help Trick my Truck.

    I intend to drive and have fun lot's of fun............
  15. Heshup

    Savage X SS Help Trick my Truck.

    Ordered the parts in the first post today but the huimp pack. Still working on that. Mondragon I have no hobbie shops near me. I live in the deep south south and they pump sun light down here. :) runoverbysavage going to see how far I can take this truck with hop-ups. I will have fun...
See more
Back
Top