Recent content by DrtBikDave

  1. DrtBikDave

    Would Porting a K4.6 H.O Be the same as the K4.6 Standard

    Thanks for the info.
  2. DrtBikDave

    Filling/stuffing Crank? Need Pictures!

    Ok, I missed it, i beg your forgiveness.
  3. DrtBikDave

    Filling/stuffing Crank? Need Pictures!

    What is the best substance to fill with. I'd be afraid that it would come loose at high rpm. And if I was to fill it with welding rod it might loose its hardness.
  4. DrtBikDave

    Would Porting a K4.6 H.O Be the same as the K4.6 Standard

    I have the K4.6 H.O and am thing about trying this but would like some guidance on the task at hand. I am very good with my hands and could duplicate a job if I had some detailed pictures. Any help?:yellowhack:
  5. DrtBikDave

    Crash's HPI K4.6 engine mod

    I have the K4.6 H.O engine. If I was going to Port and Polish mine could I just copy what you did or would it be a little different. If I'm not mistaken the main difference is the crank and piston / cylinder. I have been told that the cylinder has more ports. as for the crank I just know it has...
  6. DrtBikDave

    What Tire and Wheels should I get

    How are Axial beadlock rims AX8046
  7. DrtBikDave

    What Tire and Wheels should I get

    Once converted is there one type of wheel that is better than another?
  8. DrtBikDave

    What Tire and Wheels should I get

    If I convert To 17mm do I need (or should I ) change the axles to the newer Universal joint style.... Remember I am working with an Old school 21bb Savage with a K4.6 h.o engine and a three speed transmission. I prefer racing, bashing, and jumping my savage to rock climbing
  9. DrtBikDave

    What Tire and Wheels should I get

    Gracias (Thanks)
  10. DrtBikDave

    What Tire and Wheels should I get

    They are the 14mm Ones. If I'm replacing them do I go 17mm or 23mm. What are the pros and cons of each
  11. DrtBikDave

    What Tire and Wheels should I get

    I've stripped out the hubs of two sets of wheels, What would be the best brand of wheels to prevent this happening again? I mainly use my savage for racing at the local track and terrorizing the neighborhood cats that congregate in front of my house.
  12. DrtBikDave

    Wasted Mods

    Integy MSR 4 & MSR 5 Shocks After continuously bending the shafts on integy MSR 4 Shocks I upgraded to Integy MSR 5 shocks. They still bend too easily. I only run 10wt oil until I can afford to replace them. I will say they look nice but as far as functionality is concerned, Well I am done...
See more
Back
Top