Recent content by bifftit

  1. bifftit

    Savage Flux Hp Input / Help Body or Chassis

    guess I never did post any last picture.....will add a bonus of my other 2 savages!( X and And XL)
  2. bifftit

    Brand new savage xl flux recommended upgrades due do stock failure? 11-1-2023 I heard there’s a few must dos

    get the rear tierod eliniminating hubs from Integy aluminum from bearing carriers, but keep the piece between that and the arms plastic take your shocks apart and put a short piece of fuel line on the rodthen put it back together so the fuelline is between shock bottom and piston (limits shock...
  3. bifftit

    Savage Flux Hp Input / Help Body or Chassis

    thats a pretty nice write-up. those parts only come from 1 model of savage......the model before the present one . its doubtful many parts from the present savage fluxXL will even fit the previous model
  4. bifftit

    Shocks

    Xmaxx is a pan truck. those may be too short. Savage uses 160mm long shocks
  5. bifftit

    Shocks

    I dig the pictures of them beside small bore savage shocks. they look really nice
  6. bifftit

    Where , OH where should my ESC go?

    here it is. still working on my motor fan bracket
  7. bifftit

    Savage X Flux Diffs

    so, I sould put a old set in my new flux XL? I tried replacing the diffs when I had them open with an old set of diffs but when I put them together they wouldnt spin in the housing, . its like they changed the gearing pitch on the newer ones, so i put them back in. I didn't try changing pinion...
  8. bifftit

    Savage anti-squat

    stiffer springs, heavier oil, maybe you could even double spring with a heavy and light spring ' used to be able to use traxxas tmaxx shock springs( they are only about a 1/3 as long as an HPI shock spring) with Hpi springs and shocks for a "dual rate" type of absorber
  9. bifftit

    Shocks

    2 of my 3 savages have Losi LST shocks. New XL need them and i have some of the parts to build them for it but they have gotten expensive and hard to find since i last time i needed parts. are there any more "modern" replacements of equal size?
  10. bifftit

    Put To Bed!

    I live up on the Frozen Tundra (North Dakota) I have only one engine I run during winter (OS-30VG) its been a little bear at -25 in 2ft snow. I wrap it good with sock and aluminum foil to help it keep temperature. otherwise none of my other nitros have been run during winter ( LRP .32, Picco...
  11. bifftit

    Pre painted bodies

    WOW, even stockers have gotten terribly expensive..... that being said HPI lids pretty much are the same fit throughout the years so almost any stocker will fit thos chassis as long as its not for the XL versions
  12. bifftit

    Savage anti-squat

    add more shocks, or bigger shocks?
  13. bifftit

    Where , OH where should my ESC go?

    very nice indeed. what motor mount is that? plate for the esc was a trim piece from a 1965 15Ft camper I used to have
Back
Top