Search results

  1. bifftit

    Savage Flux Hp Input / Help Body or Chassis

    guess I never did post any last picture.....will add a bonus of my other 2 savages!( X and And XL)
  2. bifftit

    Brand new savage xl flux recommended upgrades due do stock failure? 11-1-2023 I heard there’s a few must dos

    get the rear tierod eliniminating hubs from Integy aluminum from bearing carriers, but keep the piece between that and the arms plastic take your shocks apart and put a short piece of fuel line on the rodthen put it back together so the fuelline is between shock bottom and piston (limits shock...
  3. bifftit

    Savage Flux Hp Input / Help Body or Chassis

    thats a pretty nice write-up. those parts only come from 1 model of savage......the model before the present one . its doubtful many parts from the present savage fluxXL will even fit the previous model
  4. bifftit

    Shocks

    Xmaxx is a pan truck. those may be too short. Savage uses 160mm long shocks
  5. bifftit

    Shocks

    I dig the pictures of them beside small bore savage shocks. they look really nice
  6. bifftit

    Where , OH where should my ESC go?

    here it is. still working on my motor fan bracket
  7. bifftit

    Savage X Flux Diffs

    so, I sould put a old set in my new flux XL? I tried replacing the diffs when I had them open with an old set of diffs but when I put them together they wouldnt spin in the housing, . its like they changed the gearing pitch on the newer ones, so i put them back in. I didn't try changing pinion...
  8. bifftit

    Savage anti-squat

    stiffer springs, heavier oil, maybe you could even double spring with a heavy and light spring ' used to be able to use traxxas tmaxx shock springs( they are only about a 1/3 as long as an HPI shock spring) with Hpi springs and shocks for a "dual rate" type of absorber
  9. bifftit

    Shocks

    2 of my 3 savages have Losi LST shocks. New XL need them and i have some of the parts to build them for it but they have gotten expensive and hard to find since i last time i needed parts. are there any more "modern" replacements of equal size?
  10. bifftit

    Put To Bed!

    I live up on the Frozen Tundra (North Dakota) I have only one engine I run during winter (OS-30VG) its been a little bear at -25 in 2ft snow. I wrap it good with sock and aluminum foil to help it keep temperature. otherwise none of my other nitros have been run during winter ( LRP .32, Picco...
  11. bifftit

    Pre painted bodies

    WOW, even stockers have gotten terribly expensive..... that being said HPI lids pretty much are the same fit throughout the years so almost any stocker will fit thos chassis as long as its not for the XL versions
  12. bifftit

    Savage anti-squat

    add more shocks, or bigger shocks?
  13. bifftit

    Where , OH where should my ESC go?

    very nice indeed. what motor mount is that? plate for the esc was a trim piece from a 1965 15Ft camper I used to have
  14. bifftit

    Where , OH where should my ESC go?

  15. bifftit

    Where , OH where should my ESC go?

  16. bifftit

    Anyone got one of these or know where I can get one HPI #86357

    you could have possibly turned and drilled the braces to fit sideways and mounted them on top of the plate and to the frame. engine would still have fit
  17. bifftit

    Where do I start?

    could be as simple as the spur clutch being hazed
  18. bifftit

    Where , OH where should my ESC go?

    where OH where should it be? are there ant reasons why it cannot be mounted low in the chassis, rather than up high on the transmission like the stock ELC-6S was?
  19. bifftit

    Evolution of the Savage Flux?

    the changes started with the black lid truck . differentials are different to. the old ones would not fit into this model or newer, they were too big
  20. bifftit

    New savage xl flux clutch to differential conversion

    the newest version of the Savage XL seems more like a center than they have ever had. problem is, with older frames you will still need to modify frame to even bolt it between framerails. new holes will need drilled, shafts will need to be measured to mount the newest diff into older frame to...
Back
Top