Hpi Savage Picture Thread (post pics here)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
My savage X with an LRP28 in it.
2013-0316-SavageX-PipeSideLow.jpg

2013-0316-SavageX-TankSideHigh.jpg

2013-0316-SavageX-TanksSide.jpg

2013-0316-SavageX-BottomSkid.jpg
 
Here are a few of from View attachment 1454

I had a set of tires very similar to those a long time ago on an old savage with beadlocks. I really liked them. They were kind of hard compound, but worked really well for concrete/gas running. I think they were hot bodies brand.

2006-0218-SavageTankSide.jpg


My first savage. 10 years ago. Don't have any higher res photo's to read what's on the tire side... probably don't exist anymore anyway. The beadlocks wouldn't hold up, so I glued them and when I tried to remount them to rims later, two tore on me and I threw them away.
 
After giving my savage a complete overhaul (list of parts is way to big to mention) i wanted improvements too, 1 of which was i wanted to sort out the jelly tyres, for something that will give much better handling, lighter too so less strain on running gear, didnt need to spend much on these wheels, much lighter, lower profile and widened the stance of the truck, very happy with the way its turning out, the truck is now a massive improvement from what stock has to offer

old wheels
IMAG0169_zpse7a8cvlt.jpg

new
IMAG0275_zpsz5mzyewh.jpg
 
After giving my savage a complete overhaul (list of parts is way to big to mention) i wanted improvements too, 1 of which was i wanted to sort out the jelly tyres, for something that will give much better handling, lighter too so less strain on running gear, didnt need to spend much on these wheels, much lighter, lower profile and widened the stance of the truck, very happy with the way its turning out, the truck is now a massive improvement from what stock has to offer
new
IMAG0275_zpsz5mzyewh.jpg

What tires/wheels are those? Very low profile!
 
After giving my savage a complete overhaul (list of parts is way to big to mention) i wanted improvements too, 1 of which was i wanted to sort out the jelly tyres, for something that will give much better handling, lighter too so less strain on running gear, didnt need to spend much on these wheels, much lighter, lower profile and widened the stance of the truck, very happy with the way its turning out, the truck is now a massive improvement from what stock has to offer

old wheels
IMAG0169_zpse7a8cvlt.jpg

new
IMAG0275_zpsz5mzyewh.jpg



Anyone ever have any luck finding these tires and wheels? I have found them several places but they all say out of stock. I would like to maybe grab some of these too. Anyone have a weight on them?
 
Had to do something whilst it rained,had to be fuel lines as its all I had to hand.
 
Haven't posted here in a while. I serviced my savage replacing all bearings from steering to diffs to everything in-between, new diff oil 30k/20k F/R, rebuilt/inspected transmission, new fuel line/filters, inspected/degreased/resealed engine, installed longer FLM TVP's (i had the standard length and didn't like them), new XL basher body, geared down to 16CB, relocated my throttle spring to the rollbar, fabbed some DE mudflaps in the rear, rebuilt my shocks and put 45wt shock oil around, replaced and loctite'd screws that needed it.
IMAG0040_zpsfk78dpta.jpg

RPXD0002_zpsjhrpubsg.jpg

RPXD0002_zpsgbxiyh3d.jpg

RPXD0007_zpsetapoken.jpg

RPXD0003_zpsrmvg3eo3.jpg

RPXD0005_zpsxii4beiu.jpg

RPXD0016_zpspqf9xvbd.jpg

RPXD0012_zps7tuod3ac.jpg

RPXD0006_zpstaobnpa8.jpg

RPXD0007_zpsdudwrxgs.jpg

#GAMEOVER
 

Latest posts

Members online

Back
Top