What servo horns are you using for the XP/Ace?

[texasavage]

I'm getting ready to install my XP DS1015-DS1313 servo's and I'm not sure what horns to order. Did a search on google and found that they use smaller spline than the Futaba although both are 25 tooth count. Some have fixed this by using a thin plastic bag to take up the slack, but I'd rather just get the right horn instead.

What horns have you used?

Thanks!

 

[Bankrupter]

I'm using dynamite alloy chepys

 

[JoeGuam]

RCE10380BK Racers Edge Aluminum Pro Adjustable Single Arm Futaba Servo Horn (Black)

 

[texasavage]

Thanks guys!

Ok so it is the Futaba 25 tooth count.

This will be for a midtanked setup, steering servo on the tvp's

Joe
That is for the steering? What about the throttle?

Bank
Your talking about the standard single screw mounted ones (without the lockdown)?
What lengths do you suggest?

 

[JoeGuam]

Thanks guys!

Ok so it is the Futaba 25 tooth count.

This will be for a midtanked setup, steering servo on the tvp's

Joe
That is for the steering? What about the throttle?

Bank
Your talking about the standard single screw mounted ones (without the lockdown)?
What lengths do you suggest?

I am use the racer edge for both for my ACE 1015 and SF-5
servo

 

[JoeGuam]

https://www.hpisavageforum.com/forums/showthread.php?t=15237&page=6

look at post 53

 

[texasavage]

Ok good deal, that makes things easy.

Yeah I was looking though your build and seen that but it just said steering in the title and showed the ds1015.

Thanks for the info bud

 

[JoeGuam]

look through the post and you will see the horn attached to the servo

 

[texasavage]

I see the steering, must have missed the throttle.

BTW..Nice thread with lots of pics!

 

[frddyj]

racer edge clamp style for me http://www.tcscrawlers.com/Racers-Edge-Aluminum-Pro-Servo-Horn-SS-Futaba-Black-RCE10380BK-p-17894.html

 

[J1A1H]

I'm using an ANSMANN Racing alu servo horn... But i found it to be quite long and got in the way of my motor, but unless you have got any obstructions around the servo horn then it should be fine

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=370350013232&ssPageName=STRK:MEWNX:IT#ht_1123wt_1165

 

[texasavage]

Great! Thanks for the helps guys!

I ordered the Racers Edge clamp style for Futaba horn

 

[JoeGuam]

Good on you Tex. It is a nice horn