welding antenna to reciever need help please

[RC CHIC]

hi guys, I need some help. The antenna detached from the receiver and I have to weld it back on. I went out and bought the things I needed I hope and now I don't know where to begin.

I was wondering if any of you know of any websites or if you could help me as much as you possibly can.

Thanks

 

[clemet]

I'll try to find you what you need. It s fairly simple. Open the receiver by removing the screws or prying the tabs off depending on which one you have. Then you are going to solder the wire back on. Here is a link to a pretty good site.

http://misbehavin-rc.com/pit-lane/receiver-repair/g-receiver-repair.asp

 

[Jeremy]

Hope this will help you

Welcome to HPISF
https://www.hpisavageforum.com/forums/showthread.php?t=2162&highlight=replacing+your+antenna+wire

 

[RC CHIC]

thank you for your help but that was not for my receiver and the other site does not show me where to weld the wire too. I have a spektrum sr 3000 and i don't know where to weld it too.

I hate to be a pest but I am been looking all day so far for some help.

thanks again

 

[Double-O-Zilch]

The best route to go in a situation like this is what I call a "Chinesse Blueprint". I'm not meaning to offend anyone. It just means looking at another one just like it. You're not going to find a pic of the thing apart unless someone else has done it on another forum. You're best bet is to hope someone on here will be nice enough to take a pic of their's for you. I don't have one other wise I would do it. If you need tips on how to solder let me know. You may be able to tell where it went since the solder broke. Look for some solder that isn't smooth and that will most likely be the place.