Upgrade for T/B servo .

[Jurgen]

I want to upgrade the throttle/ brake servo . I have a JR 9100T steering servo my brakes are weak the servo moves very little when applying the brakes . I am looking at this one http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXUZ76&P=ML any other recommendations SF-2 SF-5 ?

 

[88gtanotchback]

it looks like money is no object if your looking at that one so go either
ace 1313
# Transit time: 0.13 sec/deg @ 6V
# Torque: 12.5 kg/cm (173.6 oz/in) @ 6V

futaba s9451
Speed .10 Sec 60 Degrees 6V
Torque 121 oz in 6V

JR 9100s
Torque: 180 oz/in @ 6V
Speed: .06 sec / 60 degrees @ 6V

i run the top two, i have no experience with the JR 9100s but i figured it matches your current set up.

 

[Jurgen]

I really don't want to spend too much as my sf-1 was working fine in my other savy but this one doest swing much when I apply the brakes if a sf-2 is good enough i'll get that for 1/2 the price .

 

[88gtanotchback]

yup sf2 will work. have you done the ofna throttle mod yet?

 

[Jurgen]

No i have not yet i think this servo might be weak caz when i hit the brakes it only moves a little bit it doest do a full swing . I am also using a rechargeable hump pack .

 

[88gtanotchback]

they are known for getting tired...id recommend the throttle mod as well. its a good system.
http://www.rcbasher.com/savthmod1.html
theres some cleaner set ups in the forums if you have a look through, i just had that link handy. your brakes will be WAY better. good luck

 

[frddyj]

do you have a dig Tx? & how much you wanna spend?

 

[Jurgen]

do you have a dig Tx? & how much you wanna spend?

I am still running the stock hpi radio on the truck with a fail safe i was either going to get a new 2.4 radio for the truck or get a extra 2.4 receiver for my traxxas 2.4 link radio to use on this truck too . I don't want to spend alot if i don't have to i guess the sf-2 would be enough .