tuned pipe for savage

[<SAVAGE>nitro mad]

Whats the best tuned pipe can i get for my new stock savage 4.6? I'll proli start my upgrades here, gonna b used for bashing B.M.X tracks,and while I'm asking i need a pipe for my 1/8 buggy its got a LRP Z28 spec3?

 

[Pope]

I love my ths pipe. 086 will work good too. Or even the hpi polished pipe.

 

[<SAVAGE>nitro mad]

thanks NJ...RB Tuned Pipe EFRA 086 POLISHED? is this a good pipe or am i better off with one from ONFA or DYNAMITE pipe and what does 086 mean? is it the smaller the number the smaller the chamber, what affect does this have?

 

[Pope]

Dynamite 086 pipe would be best not sure what the numbers mean.

 

[maximusraylius]

i love my ths pipe on my lrpz28 also.. and the ofna 086 is good and the hpi polished is good ...don't get the hpi ribbed though......its just a noise maker...

 

[frddyj]

Magoo runs the Dynamite 086 on his F4.6 and it has had a noticeable increase in performance.

not sure what the 086 means tho, prob design or somethin. i slapped one on my mill & it ran sweet & that was about all of the thought i put into it.

 

[Bankrupter]

Ive never heard of the RB 086 but the 086 rips on the LRP. I like the rpm of the ofna over the Dyna. I have them both.

at 1 min mark this is my LRP on a OFNA 086 running tall 16/45 gears
http://www.youtube.com/watch?v=JDzHfx7oqV8

 

[Ducman82]

i have an ofna 086 on my picco. love it to death

 

[<SAVAGE>nitro mad]

Thanks guys, nice vid Bank. The RB 086 pipe comes from rchobbies.com.au/store/
This is where i get all me from sent to me, here in Austraila.They don't seem to have any Dynamite or onfa pipes, this seems to be the only 086 pipe in there, The RB mills must be alright they go for a fair few $$$......

 

[dockharris]

does any 1 have a link 2 the 086 pipe that will work on the savage x4.6 rtr?

 

[Magoo]

Magoo runs the Dynamite 086 on his F4.6 and it has had a noticeable increase in performance.

Yeah, it is a great pipe. swapped the stock plastic pipe with the 086 and have not looked back since.

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXMVY1&P=ML will work with the 2 shock setup the dynamite header will only fit a savage with the 1 shock setup.