tell me what i need

[dirtyamericanx]

Got it on a trade, 4 tec for a tmaxx, but I've heard so much good about these trucks i decided to rebuild it rather then parting it out. So help me figure it out, I know I need a tank, clutch bell, spur gear, engine mounts, wheel hexs and nuts, tie rod, and steering servo. ill put the pix on Photobucket and put the link on here.

 

[dirtyamericanx]

http://s252.photobucket.com/albums/hh3/dirtyamericanx/savage x/

 

[oregonmud]

Screws for your throttle servo arm

Pins for the wheel hexes

battery/RX box door

Zipties on your bumper braces

Maybe a new clutch shoe? It looked to me like you were missing one in the pic.

New bearings. All that sand makes me nervous.

 

[dirtyamericanx]

Yea, I'm currently in Mississippi, where I got it, was hoping the tmaxx receiver will work, and I'm missing a spring for the clutch, but the motor is good, I have ran it.

 

[oregonmud]

The RX you have should be fine as long as you have the radio to go with it. You should take all the A arms off and thoroughly clean the sand out of everything. Unless you just plan to run it is sand then don't even bother.

 

[dirtyamericanx]

I have no choice but to run it in sand till I get back to ky, I'm not a fan of sand at all

 

[dirtyamericanx]

Oh and if anyone has any of the parts for cheap I'd be interested as well,

 

[oregonmud]

I have some spare clutch springs laying around somewhere. I should have a few little misc. hardware assortments laying around too. PM me your address and I will see what I can scare up for you. Freebie!

 

[redneck]

i have an xl and a ton of parts i am looking to get rid of

 

[dirtyamericanx]

How much?

 

[Spruce]

i might have some spare parts that you could use, what part of ms are you in?

 

[dirtyamericanx]

Ocean springs.

 

[dirtyamericanx]

Clean

<a href="http://s252.photobucket.com/albums/hh3/dirtyamericanx/savage%20x/?action=view&amp;current=e8fbdb4c.jpg" target="_blank"><img src="http://i252.photobucket.com/albums/hh3/dirtyamericanx/savage%20x/e8fbdb4c.jpg" border="0" alt="Photobucket"></a>

 

[dirtyamericanx]

Use this one

http://i252.photobucket.com/albums/hh3/dirtyamericanx/savage x/e8fbdb4c.jpg

 

[redneck]

looks nice and no mills i am looking 4 3 plus shipping it alot of parts me me

 

[redneck]

opps pics http://s729.photobucket.com/albums/ww292/savageguy/savages/

 

[dirtyamericanx]

dregonmud, you still have some parts you can spare? sorry I haven't made it on in a while