Savage XS Flux Vapor Pro ESC Blinking Green Light

stoopidfast

New Member
Messages
1
Hey All,
Been a few years since my HPI Savage XS Flux had a thermal event. I thought when it happened I replaced my ESC... its been about 10 years.
My question is, I attempt to set up the ESC following all the steps in the manual and as soo as I plug the battery in the green light on the vapor pro starts flashing and I can't do anything. Play with the throttle, switch some wires and nothing. Do I need a new ESC?
Thanks.
 

orzowei69

Active Member
Messages
88
Location
Spain
Hi.
Check that the throttle trim is set to 0.
If it still doesn't work you may need to recalibrate the ESC.
This is what I remember from when I had one in my XS.
Vapor pro is a Castle Sidewinder with a fan. Instructions, programming card and error messages are the same for both.
There is a lot of info for sidewinder esc problems on the net that can be checked if you don't get it to work.
 

Latest posts

Members online

Top