Sumo Savage
Active Member
- Messages
- 63
- Location
- Chandler, Arizona
Hi, my battery caught on fire and I had to replace the wires and battery with a new bec and I don't know how to re wire it. I have the original receiver box with three servos, a bec, and an on/off switch. The rx has three channels with an extra slot too. I need to plug in the wires to the right slots ,plug the battery to the switch somehow, solder the bec to one of the switch wires. (I now have it soldered to the battery but if I keep it that way it will drain the battery) I also don't know how to plug to males into each other. For example the on/off switch to the battery. Any help is greatly appreciated.