Savage 4.6 electronics won't work

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Marc

New Member
Messages
1
Ok so I was using my Savage 4.6 and it was working fine but then I lost control of it and it started going in circles so I ran over and shut it off, I tried it again and after a few seconds I lost control again, now it just will not turn on. The engine is totally fine but for some reason the electronics inside the truck just won't turn on, usually it twitches when I turn it on but it just does nothing, I replaced the batteries in the truck even though they were fine and still nothing and the remote batteries are also fine. I'm honestly at a loss for what to do, any help would be appriciated because I'm ready to throw this thing out lol
 
The contacts in your switch could be corroded. Try bypass the switch by plugging the battery straight to the receiver. If that works, get some electrical cleaner to spray in of the switch.
 
Or it is possible the receiver has quit working, so if what was suggested above doesn't work try switching out the receiver and see what happens......
 

Members online

Back
Top