parts on the way

[benny]

i have a new 3 shoe flywheel and aluminum shoes one the way for my .21 and just wondering if anyone else is running aluminum shoes and how well they grp and how long they last and i also have a one way bearing replacement kit comeing and wanted to know if anyone else is useing a one way bearing replacemenet kit

 

[Jeremy]

Have never used the one way bearing kit ...

As for the alloy shoes Yea I run them .. check out this link

https://www.hpisavageforum.com/forums/showthread.php?t=2609&page=2

 

[benny]

thanks site jester I'm glad i made a good investment as for the one way bearing kit we will c how well it lasts

 

[Jeremy]

yea let us know ... I don't know if anyone on here has tested them

 

[benny]

yeah i guess ill be the first and i hope it fixes my problem of cracking and stripping one way bearing

 

[RangerRock]

As for clutches I am still running the stock teflon shoes at 10 gallons. 5 with stock motor and 5 with the STS 28 and now its back on the stock motor. Let me know what you think of them, I may get me some

 

[benny]

alright ill keep avaryone posted on the proformance

 

[Jeremy]

As for clutches I am still running the stock teflon shoes at 10 gallons. 5 with stock motor and 5 with the STS 28 and now its back on the stock motor. Let me know what you think of them, I may get me some

10 gallons !!!!!!!!!!! thats like a record man :bigsmilie: :bigsmilie: :bigsmilie: :bigsmilie:

I used to change my shoes and springs . every gallons to every 2 gallons . 10 tho thats insane dude

 

[k0m0d067]

I have purchased the OWB replacement kit as well (pretty sure I was the one that showed everyone the link) anyway, although I haven't tried it yet (this home improvement crap is taking forever) it should work like a charm...at first I was worried it would put undue stress on the little connecting pin and spring that connect the back-plate to the crankshaft, but since they are only under stress during starting, and it's the same stress applied as if you were using the standard OWB, then there should be no downside...

but if there is, by all means benny, keep us posted...I'll do the same if I ever get the chance to try mine 😉

 

[benny]

yeah ill have mine all put toghether and tested my next thursday i hope

 

[Mondragon]

Get new CB bearing if you haven't allready. Also when running aluminum clutch shoes, check the every so often and clean the burrs off the edges of them. If the shoes do not come with springs, get 1 m springs, stock savage springs are to light. the 1 m springs can be a pain to get one but work well with aluminum shoes.

 

[benny]

thanks mondradragon the shoes come with 1m springs and I'm getting new bearings next month

 

[savagecre]

yeah I'd like to see how long the Aluminum shoes last so give us a good Work up review of them please.

 

[benny]

alright no problem i hope they last a while