part #'s

[redneck]

need the flm best mid tank to do also the best one to do want to order the parts so i can start also lokin for a tank 250+ cc would be nice i get 10 minutes run times with stock tanks

 

[Hypnotiq]

FLM Servo Plate FLM45500 = 15.00
FLM Servo Mount FLM46000= 8.00 <<< need 2
RC10GT BLK Rx box RPM = 9.00
OFNA Linkage (P/N #10724)= 8.00
OFNA Sliders (P/N #10704) = 4.00

Insert tank here _______________________

 

[Hypnotiq]

oh and linkage... you can get like airplane linkage and use that.. thats what i did.. figure out what style linkage you wanna go with..

 

[redneck]

can you send me the thjerd where it is

 

[Hypnotiq]

can you send me the thjerd where it is

https://www.hpisavageforum.com/forums/forumdisplay.php?f=119 <<< pick one

 

[Scott]

Here is another option that you could use with the 250cc tank.
http://www.platinumrcproducts.com/prc 125.html
He is a member here..Larsenracing you can hit him up with a pm..
I got the plate and tank from him..:rock:

 

[Hypnotiq]

oh forgot you said ofna 250... the flm mount won't work with the ofna tank sorry red.

 

[xll-SavageX-llx]

Here is the OFNA 250cc tank (http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXTVD0&P=7)

and if you use the OFNA 250cc tank you can't use the FLM servo plate (w/o modding it) so you can make your own servo plate or get the IRC mid tank kit (http://www.innovative-rc.com/innovativerc-tank-p-312.html)

 

[Larsenracing]

oh forgot you said ofna 250... the flm mount won't work with the ofna tank sorry red.

Ahh but it will if you use the PRC125 plate because you use one for the bottom side of the plate to mount the Servo horizontally to the bottom of it.

 

[redneck]

other then the ofna tank what else is a very good tank

 

[Larsenracing]

The Hellfire tank is pretty good.

 

[Hypnotiq]

D8 clunk tank works.. :werd:

 

[redneck]

ok thanks everyone for the help but the mid tank will have to wait till i get some cash once grass grow no job other then cuttin grass