Part# Help for Uniball for K5.9 (Carb Linkage Ball)

[Mattholew]

I need to get a carb linkage uniball for a K5.9, actually its for my Losi 350 in my 8ight, but I know the one off my K5.9 works because I robbed it from my Savage XL yesterday so I could run the 8IEGHT.

The one that came on the 8EIGHT RTR was plastic and ended up stretching and now won't stay on the shaft.

Will this part work on both by any chance?

I know the Axial Pull Start for the .28/.32 fits the K5.9, so I thought this may fit the carb.


http://www.ultimatehobbies.com/istar.asp?a=6&id=AXIAX022!1142&color=N/A&size=N/A&subsize=

 

[Scott]

After looking at the HPI manual the part # is 15266...

Link for the manual:http://www.hpiracing.com/graphics/instr/pdf/10515.pdf

Link for the part:http://www3.towerhobbies.com/cgi-bin/WTI0095P?FVSEARCH=15266

Hope this helps you out Matt..😛eace:

 

[Mattholew]

Nice. Thanks for helping me figure that out. I figured the K4.6 would fit the K5.9, but needed a second opinion.

 

[Scott]

Nice. Thanks for helping me figure that out. I figured the K4.6 would fit the K5.9, but needed a second opinion.

Not a problem Matt..Thats what this place is all about helping each other out..Thats what the XL manual showed for the 5.9...