Our LST2 build

[Xjeepguy]

Me and Bama just got done with our LST2 recently and figured we would post some pics before we bash it to peices. It wont look this good for long lol.

Here's what we did to it:
Losi hard annodized chassis plates/skids
Hard annodized threaded shock bodies
Titanium Nitrited shock shafts and hinge pins
Hard annodized one peice pipe
Titanium nitrided gearset
RPM arms
23mm beadlocks
Axial .28 with turbo head button and nova head (Nasty)
Losi Sway bars
RPM gear cover
New era roll bar
Bluebird 630MG steering servo
Tony's screw kit
FOC
Oversized tank
Vertigo CF brake disc with custom linkage to make them less damn touchy lol
aluminum gearbox braces
Hard annodized engine mounts
As usual we run it with a Nomadio Sensor

We took the truck apart and pretty much rebuilt it with improved parts. The poor thing had been bashed mercilessly and was due for a refresh. The original engine was worn out, so we went with the Axial. This thing goes like a scalded cat. We cant keep the front wheels down. Here's some pics. It wont look like this very long 😀.

 

[Jeremy]

WOW you have been busy ... another good looking rig nice job

 

[Crash]

looks pretty good guys.

run it and send us a vid. love the bead locks

 

[lifter37]

awesome truck, hope to see vid soon. what make are the beadlocks?

 

[Xjeepguy]

here will likely be a vid, we will beat this truck to within an inch of it's life as soon as it gets cool enough not to pass out doing it lol.

The beadlocks are made by integy, and they are awesome. one of the very few companies to make 23mm beadlocks.

 

[savagecre]

That might take a while lol thats one tough truck.

 

[k0m0d067]

can you buy the readlock rings seperately? I've got a set of the proline ones, but would LOVE purple rings...

 

[xtremsavage]

Nice looking rig. Can't wait to see it in action.

 

[4x4]

great job!
4x4

 

[Xjeepguy]

Thanks guys,
You can buy the rings seperatly, but I am not sure if they will fit a proline rim or not.

 

[lifter37]

I'll tell ya, your going to have to bash pretty hard to hurt it. the only thing you may break on big jumps and I mean really big jumps is the front top plate. I've been through a couple of them. they are vulnerable to snap at the second screw from the back on the plate.

 

[Xjeepguy]

I'll tell ya, your going to have to bash pretty hard to hurt it. the only thing you may break on big jumps and I mean really big jumps is the front top plate. I've been through a couple of them. they are vulnerable to snap at the second screw from the back on the plate.

We replaced all of the chassis plates with hard annodized, hopefully they will hold up.

 

[lifter37]

cool, awesome truck bud

 

[X25]

Great looking truck i love the paint job keep up the good work