New savage

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
S

southpaw

Member
Messages
6
Hello all. This being my first post I'd like to say there is a good bunch of people here and a lot of info. And I need some.lol
I have a new Savage X. I have run about 5 or 6 tanks threw it. I'm starting to lean it out some. I'm about 1/4 to 3/8 of a trun from base line. My temp is around 210. If I let off the throttle or apply the brakes it stalls. Also the only way I can start it is if I give it some throttle. Is that normal? Thanks ya'll!!
 
Thanks guy's. I've been lurking for awhile. This is a great place. I will lean out the lsn 2morrow. I thought about it but wanted to get the hsn a little closer first. But that would make it stall when you break?
 
Before you make the LSN adjustment, check the carb gap first. There should about a 1 mm gap with the brakes applied. Should have told you this first, but I jumped the gun.. LOL. Good luck
 
Same Issue..

I have the same issue, if i start it i can't keep it on. As soon as i remove the ignitor it turns off. I'll try out some of the suggestions. Again, this is a GREAT forum..!!!

Lot's of info here and i plan on using it all.
 
Thanks guys. I thought the glow plug also. But it did the same thing with a new one. I hope to run a tank or two threw it today. It has been crazy cold here in VA. But were looking for 60 today. It started to run a little better when I leaned the lsn the other day. But it got dark on me.
Thanks again for the welcome !
 
Thanks guy's. Its running much better. Only now for some reason it will not steer. I have fresh batts thinking that might be it. But it will only turn when it wants to and real chopy then. It was fine the last time I ran it.
 
welcome to the forum and for the steering problem might want to get a hump pack if you don't already have one
 
southpaw, where in VA are you located? I am in Chesapeake and there are a few other members from the Hampton Roads area here.
 
dravage, Already use a humpback. If I have it on a stand it just jerk's when I try to turn it.
Allanq, I live in Cumberland. About 50 miles west of Rich. Close to Farmville.
 
I just took the steering servo apart. Its trashed. I would have thought it would have lasted more then 8 tanks of just yard play. Oh well time to up grade. :smiliejam:
 
welcome, as stated before lean it out a little and adjust carb, just remember to make micro adjustments, a little goes a long way.
 
I had the same problem with my savage some time ago. Once I had that LSN adjust correctly it stoped stalling. But like they guys have said adjust in very small amounts I have learned the hard way turning my needles like an oven nob. Now I just turn like 1/16th turns until I have it just right.
Still haven't built my savage yet, been sitting in the box since Christmas.
 
You must log in or register to reply here.

Latest posts

Members online

Total: 937 (members: 1, guests: 936)
Back
Top