Need Help, Will These Work ??

[xll-SavageX-llx]

Hey guys I ordered all my stuff for the OFNA 250cc Mid-Tank and i got thinking instead of making my own stand-offs for the tank, i was looking around on Tower Hobbies and found these.. (http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXHSX8&P=7) and the tank I'm using (http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXTVD0&P=7) they have measurements for the tank but not the posts :Mr.confused: iv sent a PM to orcusomega (Bob) asking if the Savage X steering posts will work and he said he would send some nylon posts to me but if these will work i could save him the shipping 😎

Thanks
- Brandon

 

[Dooley]

I'm not sure what the height its on the posts. I have an extra tank on the shelf. let me see if i can get you a measurement.

 

[xll-SavageX-llx]

I'm not sure what the height its on the posts. I have an extra tank on the shelf. let me see if i can get you a measurement.

Ok thanks Dooley

 

[Dooley]

These are the stand offs I have for my OFNA 250cc mid tank. they look to be 1 3/8" long. They level out the tank and hold it roughly an 1/8" over the mid tank plate.

 

[xll-SavageX-llx]

These are the stand offs I have for my OFNA 250cc mid tank. they look to be 1 3/8" long. They level out the tank and hold it roughly an 1/8" over the mid tank plate.

Thanks ill keep this in mind and go check out my LHS..

thanks again

 

[Dooley]

No problem. I am not sure if they are something from another truck or if PRC cuts them from nylon stock they might have. They came with their 250cc mid tank kit.

 

[Combuster]

i use the same one dooley does got them with the prc kit also

 

[xll-SavageX-llx]

i use the same one dooley does got them with the prc kit also

I custom fabricated my servo plate (https://www.hpisavageforum.com/forums/showthread.php?t=15099).. i was thinking of getting the PRC kit but i wanted a challenge 🙂

 

[chimeraxp]

these might work , what do you guys think ?
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXTJA0&P=7

i'm hunting for the same thing for mine project , and i'm thinking of picking up a set and remove the green or red .

 

[JoeGuam]

Hey guys I ordered all my stuff for the OFNA 250cc Mid-Tank and i got thinking instead of making my own stand-offs for the tank, i was looking around on Tower Hobbies and found these.. (http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXHSX8&P=7) and the tank I'm using (http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXTVD0&P=7) they have measurements for the tank but not the posts :Mr.confused: iv sent a PM to orcusomega (Bob) asking if the Savage X steering posts will work and he said he would send some nylon posts to me but if these will work i could save him the shipping 😎

Thanks
- Brandon

Brandon. Those will work. I have both and tried it on tonight but I took it off my truck because I received my PRC 125 kit today. It is the same height as the PRC kit and I recommend not using the spacers. It will be high and buy orings to absorbe vibration and shock.

 

[xll-SavageX-llx]

Brandon. Those will work. I have both and tried it on tonight but I took it off my truck because I received my PRC 125 kit today. It is the same height as the PRC kit and I recommend not using the spacers. It will be high and buy orings to absorbe vibration and shock.

THANK YOU !!
I have 3mm O-Rings to use..instead of the spacers...