Need help, engine won't start

[e.pearson3]

I was breaking my engine in. the throttle was at max.. Then egine ran the cut off ob its own. I tried to restart it and the roto wont turn. What should i do? Please help.

 

[X]

It's possible that you are hydrolocked. Take off the glowplug and turn the truck upside down for a couple minutes. That will let any extra fuel drain out of the combustion chamber. After that is done, reinstall the glowplug, but loosely. This will allow some pressure relief. Then when the truck starts you can remove your glowplug igniter and tighten down the glowplug.