LRP 28/30 roto start

[tonydig11]

well I'm my savage is really taking shape. i have yet to run it and the racing suspention kit is installed and I'm in the process of retro fitting RC8 rear shocks on all 4 courners(4 shock setup) next is the engine. I can sell the stock k5.9 on ebay for just about what i can get a LRP .28 or .30 for. my question is starting? i will NOT use a pull start and was wondering what is needed mount the rotostart to it. I'm hoping it just as simple as pulling the pull starter off and mounting a rotostart back plate.


thanks in advance everyone

 

[USMC-716]

Yep, they sell a backplate for the rotostart. I found one for an Axis mill for $18.. search and i'm sure you'll find it. Someone will probably jump in with a link sooner or later..

 

[MikeK1981]

There are a few guys here that run those mills. Someone will know the part number I'm sure. Sounds like the truck is coming along nicely, let's see some pics.

 

[tonydig11]

pics soon to come. want to get a few more and ill make a nice big post. i want to do step by step on the racing suspension and how i mount the shocks.

I am going with the RC8 shocks because my buddy has the rc8 RTR and is upgrading his shocks to bigbores. so i snagged his rears and got another set for 24.99. going to install tinitrade shafts and hellfire pink 134gf springs to start. as for the moters i found the STS 28. its only 100 bucks but looks nasty nasty. still debating if i want to run the k5.9 to start or sell it and get another mill.

on a side note if someone reads this that can change the " what's a glow plug??" thing under my name it would be great. I may be new to savage but i have been a seasond 1/8 racer for years.

 

[ljrce]

under your name what's a glow plug?? will change when you make more posts

 

[USMC-716]

Hey Tony welcome to the forum!!!

 

[Mazdarx]

The LRP number you need to install the rotostart is LRP38134