HPI 87245 Racing Suspension Conversion (RSC) Spare Parts List.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.

Londoner

c0ckney geezer!!
Messages
973
Location
London, UK
Thought this may help other members, myself included in the future, when my manual eventually decides to go walk about. These are the parts needed to convert your HPI Savage into a Racing Suspension Conversion Savage!


85230 - Rod end set. 7x45mm. (the plastic ends of upper adjustable arms) qty x4 Link

86144 - Ball. 6.8x8x3mm. (the pressed in balls at the ends of upper arms) qty x4 Link

86370 - Left spindle carrier. qty x1 (includes 1x Z793 & 1x 86377) Link

86371 - Right spindle carrier. qty x1 (includes 1x Z793 & 1x 86377) Link

86372 - Left spindle. qty x1. (includes 1 x Z793 & 1 x 86377) Link

86373 - Right spindle. qty x1. (includes 1 x Z793 & 1 x 86377) Link

86374 - Upper arm brace. qty. x1 (the upper brace that fits in the bulkheads) Link

86375 - Rear hub carrier, left. qty x1. (includes 2x 86378) Link

86376 - Suspension shaft. qty x4. (lower arm mounting pin) Link

86377 - Flange pipe. qty x4 Link

86378 - Spacer. 4x8x6.5mm qty x4 Link

86384 - Rear hub carrier, right. (includes 2x 86378) Link

93617 - Turnbuckle. M5x35mm. qty x4 (upper arm turnbuckle) Link

Z224 - Washer. M3x8mm. qty x10 Link

Z243 - E-Clip. E3mm. qty x10 [Link

Z538 - Cap head screw. M3x25mm. qty x6 Link

Z548 - Cap head screw. M3x22mm. qty x12 Link

Z663 - Lock nut. M3. qty x6 Link

Z793 - Cap head screw. M4x10mm. qty x12 Link

Z819 - Aluminum washer, 3x6x3mm. qty x10 Link


I didn't bother listing the part numbers for the included allen wrenches, thread lock, etc. If you need a good set of allen drivers then check out the Bondhus ball-end drivers, top notch!
 
Cheers Morphin.

Bit alarming to see that the right rear hub carrier is now discontinued but the left is not... What you s'posed to do if you destroy your right rear carrier?

I was thinking of buying another set of rear carriers as mine have a serious amount of play where the lower (86376) pin goes through them, only after a few gals, better buy some before the hobby shop runs out!
 
I'm not sure why they would? But from looking at the pictures and comparing them both, and from my experience from using other Rear carriers, they are the same, I don't see why you couldnt use the left on right or vise versa? Now i know this isnt true for the front carriers and its obvious that the steering linkages need to be towards the backside of the arms.
 
Yea they are left and right specific, due to the toe-in.

It seems crazy to discontinue one hub carrier to me.
 
O Ok, i cant tell that from the image thanks Pope, well thats just crazy, I guess the only way to get an answer is to contact HPI?
 
I read a rummor that the whole kit was going to be discountinud somewhere can't rember where and it was just a rumor but this worries me.
 
just used your list to get parts. hpi usa doesnt like to sell individual parts for this kit. i had to talk to a supervisor and persuade him to sell me the parts. he said he would do this for one time. they werent easy with the price either...
 
i just had the same issue they don't wanna sell me the parts ... i founf them on ebay 12 dollars for a flange and screw lol
 

Latest posts

Members online

Back
Top