DOOBEEWHA
HPISF languist expert
- Messages
- 1,332
- Location
- Petaluma,Ca,
- Thread starter
- #31
-
I understand there's a member discount on them all Integy parts.
You might want to speak with chunky Monkey, here on the forum.
The thing is,... they will be shipped to you and you'll be taking the chance of
the bearing consern I had.
If you do get a tight bearing race on the parts, I would heat up the hub in the
oven at 225 degrees and freeze the bearing.
Once that's done, drop the bearing in the race. If it still is too tight to accept
the bearing, then you have a warranty claim.
Test the fit as soon as you get a chance so there won't be any time lost on
returnabillity.
-
I understand there's a member discount on them all Integy parts.
You might want to speak with chunky Monkey, here on the forum.
The thing is,... they will be shipped to you and you'll be taking the chance of
the bearing consern I had.
If you do get a tight bearing race on the parts, I would heat up the hub in the
oven at 225 degrees and freeze the bearing.
Once that's done, drop the bearing in the race. If it still is too tight to accept
the bearing, then you have a warranty claim.
Test the fit as soon as you get a chance so there won't be any time lost on
returnabillity.
-
Last edited by a moderator: