xll-SavageX-llx
★ CaNaDa Eh ★
- Messages
- 1,480
- Location
- Hamilton Ontario
Hey guys it's been a while since iv updated my savvy build, don't worry I'm still building it, ALL FLM parts were on back order so I'm stuck with out servo mounts and i also ordered a drag link(why not only $7) so that should be here Tuesday (June 1st) so here is my custom fab rush battery box mount rockout
• Started with a template ::
• Paper Template ::
• Then Scribbed the 2mm aluminum ::
• SPARKS =D
• =/ I think i worked the dremel to hard -.- (1OOF) ::
• Since you can't curve the cut off disc i took the lazy way out ::
• Polished it up ::
• Fixed it up with the dremel ::
• I then found two 2.5x3mm hex screws ::
• Then i used some 3mm lock nuts ::
• VWALA !!!!!
• I LIKE IT =D
I mite re-do this because i can only use the inside hole of the shock tower and the front end sits way to low...
BTW i weighed my savvy tonight 11.5 LBS and unless my scale was wrong thats pretty good. the front end weighs 6.25 LBS and the rear weighs 5.25 ..
I really need to get some Big Bores these stock shocks are B.S .. =)
So ill update you guys with the build when i get my mounts..
Thanks
- Brandon
• Started with a template ::
• Paper Template ::
• Then Scribbed the 2mm aluminum ::
• SPARKS =D
• =/ I think i worked the dremel to hard -.- (1OOF) ::
• Since you can't curve the cut off disc i took the lazy way out ::
• Polished it up ::
• Fixed it up with the dremel ::
• I then found two 2.5x3mm hex screws ::
• Then i used some 3mm lock nuts ::
• VWALA !!!!!
• I LIKE IT =D
I mite re-do this because i can only use the inside hole of the shock tower and the front end sits way to low...
BTW i weighed my savvy tonight 11.5 LBS and unless my scale was wrong thats pretty good. the front end weighs 6.25 LBS and the rear weighs 5.25 ..
I really need to get some Big Bores these stock shocks are B.S .. =)
So ill update you guys with the build when i get my mounts..
Thanks
- Brandon